[SR-Users] Kamailio 1.5.4 - Pike module ignoring remove_latancy parameter

Hi All, I'm running kamailio-1.5.4-tls and I want to enable pike module in it. I did some test but it isn't working properly. I mean it isn't acting according to the /remove_latancy/ parameter. When an IP address is blocked (cause it triggered the pike module), it should be blocked for the amount of time (seconds I presumed) defined on the /remove_latancy /parameter, right? but it isn't Here is my pike module config (it's just a test config) # ---- Pike --- /* we are usign default values. We should tunning it up */ modparam("pike", "sampling_time_unit", 30) modparam("pike", "reqs_density_per_unit", 10) modparam("pike", "remove_latency", 3600) modparam("pike", "pike_log_level",-1) and here is the output /Sep 10 *13:33:35* sip /home/kamailio/sbin/kamailio[21414]: PIKE - BLOCKing ip XXX.XXX.XXX.XXX, node=0xb5a2eb58 Sep 10 13:33:35 sip /home/kamailio/sbin/kamailio[21414]: Warning: too many requests from XXX.XXX.XXX.XXX:5060 Sep 10 *13:34:12* sip /home/kamailio/sbin/kamailio[21420]: PIKE - UNBLOCKing node 0xb5a2eb58 ... Sep 10 *13:35:22* sip /home/kamailio/sbin/kamailio[21418]: PIKE - BLOCKing ip XXX.XXX.XXX.XXX,, node=0xb5a2eb58 Sep 10 13:35:22 sip /home/kamailio/sbin/kamailio[21418]: Warning: too many requests from XXX.XXX.XXX.XXX,:5060 Sep 10 *13:36:12* sip /home/kamailio/sbin/kamailio[21420]: PIKE - UNBLOCKing node 0xb5a2eb58 / Shouldn't it be blocked for 3600 seconds? Then I changed the /remove_latancy/ parameter to /modparam("pike", "remove_latency", 334500) / / Sep 10 *13:37:09* sip /home/kamailio/sbin/kamailio[21462]: PIKE - BLOCKing ip XXX.XXX.XXX.XXX,, node=0xb5986b90 Sep 10 13:37:09 sip /home/kamailio/sbin/kamailio[21462]: Warning: too many requests from XXX.XXX.XXX.XXX,:5060 Sep 10 *13:37:52* sip /home/kamailio/sbin/kamailio[21466]: PIKE - UNBLOCKing node 0xb5986b90 / but the it didn't seem to have any real difference. Any ideas? / / Best Regards, Miguel Baptista