14 Nov
2003
14 Nov
'03
12:33 a.m.
Hello,
From the attached logs I would say that the
authentication in radius
server succeeded, because it returns
"Authenticated".
If ser doesn't authenticate in this case then you proabably:
- didn't updated dictionaries properly
- configured wrong secret
Read the ser-radius howto again and make sure that you have configured
everything properly.
Jan.
On 13-11 18:10, Madan wrote:
here is the log file of radius
-=-------radiuslogs---------------------
rad_recv: Access-Request packet from host 202.71.135.219:32770, id=205, length=286
User-Name = "2222(a)sip.net4india.com"
Digest-Attributes = "\n\0062222"
Digest-Attributes = "\001\023sip.net4india.com"
Digest-Attributes = "\002*3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
Digest-Attributes = "\004\027sip:sip.net4india.com"
Digest-Attributes = "\003\nREGISTER"
Digest-Attributes = "\005\006auth"
Digest-Attributes = "\t\n00000003"
Digest-Attributes = "\010"EDB2B98710FD4AC6B4022AD2E3A83BFF"
Digest-Response = "3c3d66cbf7c39f286d2cb37e3c8caa37"
Service-Type = Sip-Session
Sip-Uri-User = "2222(a)sip.net4india.com"
NAS-IP-Address = 202.71.135.219
NAS-Port = 5060
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
rlm_digest: Converting Digest-Attributes to something sane...
Digest-User-Name = "2222"
Digest-Realm = "sip.net4india.com"
Digest-Nonce = "3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
Digest-Uri = "sip:sip.net4india.com"
Digest-Method = "REGISTER"
Digest-Qop = "auth"
Digest-Nonce-Count = "00000003"
Digest-Cnonce = "EDB2B98710FD4AC6B4022AD2E3A83BFF"
rlm_digest: Adding Auth-Type = DIGEST
modcall[authorize]: module "digest" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
rlm_eap: EAP-Message not found
modcall[authorize]: module "eap" returns noop for request 0
rlm_digest: Converting Digest-Attributes to something sane...
Digest-User-Name = "2222"
Digest-Realm = "sip.net4india.com"
Digest-Nonce = "3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4"
Digest-Uri = "sip:sip.net4india.com"
Digest-Method = "REGISTER"
Digest-Qop = "auth"
Digest-Nonce-Count = "00000003"
Digest-Cnonce = "EDB2B98710FD4AC6B4022AD2E3A83BFF"
modcall[authorize]: module "digest" returns ok for request 0
rlm_realm: Looking up realm "sip.net4india.com" for User-Name =
"2222(a)sip.net4india.com"
rlm_realm: No such realm "sip.net4india.com"
modcall[authorize]: module "suffix" returns noop for request 0
users: Matched DEFAULT at 152
users: Matched 2222(a)sip.net4india.com at 224
modcall[authorize]: module "files" returns ok for request 0
modcall[authorize]: module "mschap" returns noop for request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type Digest
auth: type "DIGEST"
modcall: entering group Auth-Type for request 0
A1 = 2222:sip.net4india.com:test
A2 = REGISTER:sip:sip.net4india.com
KD =
f386a675cf9d0e8941be95dac13b40d1:3fb38069abf96aceab12c82e16d6cbdb9e4ecbf4:00000003:EDB2B98710FD4AC6B4022AD2E3A83BFF:auth
:4f5b38da39851b9b27477c4ea50c375b
modcall[authenticate]: module "digest" returns ok for request 0
modcall: group Auth-Type returns ok for request 0
radius_xlat: 'Authenticated'
Sending Access-Accept of id 205 to 202.71.135.219:32770
Reply-Message = "Authenticated"
Sip-Rpid = "1234"
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 205 with timestamp 3fb37f3e
----- Original Message -----
From: Daniel-Constantin Mierla
To: Madan
Cc: serusers
Sent: Thursday, November 13, 2003 5:58 PM
Subject: Re: [Serusers] ser/radius
Hello,
now it seems that the authentication in Radius side failed :) :
0(13462) radius_authorize_sterman(): FailureSo I need the logs from Radius server, too.
Better reproduce again the case and send both ser and radius logs in a mail.
}Daniel
On 11/13/2003 1:12 PM, Madan wrote:
Hi Daniel,
here is the debug-9 level logs
0(13462) SIP Request:
0(13462) method: <REGISTER>
0(13462) uri: <sip:sip.net4india.com>
0(13462) version: <SIP/2.0>
0(13462) parse_headers: flags=1
0(13462) end of header reached, state=5
0(13462) parse_headers: Via found, flags=1
0(13462) parse_headers: this is the first via
0(13462) After parse_msg...
0(13462) preparing to run routing scripts...
0(13462) DEBUG : is_maxfwd_present: searching for max_forwards header
0(13462) parse_headers: flags=128
0(13462) DEBUG: is_maxfwd_present: value = 70
0(13462) parse_headers: flags=8
0(13462) DEBUG: add_param: tag=b012f0317df24bc28c22c024cfa027f3
0(13462) DEBUG: add_param: epid=4afef3ee8a
0(13462) end of header reached, state=29
0(13462) parse_headers: flags=256
0(13462) end of header reached, state=9
0(13462) DEBUG: get_hdr_field: <To> [30]; uri=[sip:1111@sip.net4india.com]
0(13462) DEBUG: to body [<sip:1111@sip.net4india.com>
]
0(13462) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
0(13462) DEBUG: get_hdr_body : content_length=0
0(13462) found end of header
0(13462) find_first_route(): No Route headers found
0(13462) loose_route(): There is no Route HF
0(13462) REGISTER: Authenticating user
0(13462) parse_headers: flags=4096
0(13462) pre_auth(): Credentials with given realm not found
0(13462) REGISTER: challenging user
0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
realm="sip.net4india.com", nonce="3fb37a01834a42156a764ee9df05ad19d7687a
23", qop="auth"
'
0(13462) parse_headers: flags=-1
0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
0(13462) receive_msg: cleaning up
0(13462) SIP Request:
0(13462) method: <REGISTER>
0(13462) uri: <sip:sip.net4india.com>
0(13462) version: <SIP/2.0>
0(13462) parse_headers: flags=1
0(13462) end of header reached, state=5
0(13462) parse_headers: Via found, flags=1
0(13462) parse_headers: this is the first via
0(13462) After parse_msg...
0(13462) preparing to run routing scripts...
0(13462) DEBUG : is_maxfwd_present: searching for max_forwards header
0(13462) parse_headers: flags=128
0(13462) DEBUG: is_maxfwd_present: value = 70
0(13462) parse_headers: flags=8
(13462) DEBUG: add_param: tag=0809578b00894f62bdb457bee0c4234b
0(13462) DEBUG: add_param: epid=85dccaccd6
0(13462) end of header reached, state=29
0(13462) parse_headers: flags=256
0(13462) end of header reached, state=9
0(13462) DEBUG: get_hdr_field: <To> [30]; uri=[sip:1111@sip.net4india.com]
0(13462) DEBUG: to body [<sip:1111@sip.net4india.com>
]
0(13462) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
0(13462) DEBUG: get_hdr_body : content_length=0
0(13462) found end of header
0(13462) find_first_route(): No Route headers found
0(13462) loose_route(): There is no Route HF
0(13462) REGISTER: Authenticating user
0(13462) parse_headers: flags=4096
0(13462) pre_auth(): Credentials with given realm not found
0(13462) REGISTER: challenging user
0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
realm="sip.net4india.com", nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b
e0", qop="auth"
'
0(13462) parse_headers: flags=-1
0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
0(13462) receive_msg: cleaning up
0(13462) SIP Request:
0(13462) method: <REGISTER>
0(13462) uri: <sip:sip.net4india.com>
0(13462) version: <SIP/2.0>
0(13462) parse_headers: flags=1
0(13462) end of header reached, state=5
0(13462) parse_headers: Via found, flags=1
0(13462) parse_headers: this is the first via
0(13462) After parse_msg...
0(13462) preparing to run routing scripts...
0(13462) DEBUG : is_maxfwd_present: searching for max_forwards header
0(13462) parse_headers: flags=128
0(13462) DEBUG: is_maxfwd_present: value = 70
0(13462) parse_headers: flags=8
0(13462) DEBUG: add_param: tag=0809578b00894f62bdb457bee0c4234b
0(13462) DEBUG: add_param: epid=85dccaccd6
0(13462) end of header reached, state=29
0(13462) parse_headers: flags=256
0(13462) end of header reached, state=9
0(13462) DEBUG: get_hdr_field: <To> [30]; uri=[sip:1111@sip.net4india.com]
0(13462) DEBUG: to body [<sip:1111@sip.net4india.com>
]
0(13462) get_hdr_field: cseq <CSeq>: <2> <REGISTER>
0(13462) DEBUG: get_hdr_body : content_length=0
0(13462) found end of header
0(13462) find_first_route(): No Route headers found
0(13462) loose_route(): There is no Route HF
0(13462) REGISTER: Authenticating user
0(13462) check_nonce(): comparing
[3fb37a088e0d83f2084b0221f11e7ac8d6709be0] and
[3fb37a088e0d83f2084b0221f11e7ac8d6709be0]
0(13462) radius_authorize_sterman(): Failure
0(13462) REGISTER: challenging user
0(13462) build_auth_hf(): 'WWW-Authenticate: Digest
realm="sip.net4india.com", nonce="3fb37a088e0d83f2084b0221f11e7ac8d6709b
e0", qop="auth"
'
0(13462) parse_headers: flags=-1
0(13462) check_via_address(202.71.135.212, 202.71.135.212, 0)
0(13462) receive_msg: cleaning up
----- Original Message -----
From: "Daniel-Constantin Mierla"
<Daniel-Constantin.Mierla(a)fokus.fraunhofer.de>
To: "Madan" <madan.r(a)net4india.net>
Cc: "serusers" <serusers(a)lists.iptel.org>
Sent: Thursday, November 13, 2003 5:01 PM
Subject: Re: [Serusers] ser/radius
Hello,
please increase the debug level to a higher value (debug=9), try again
and send the logs to us. From your previous mail on the seruser list
(subj: radius issue) seems that the Radius server authenticates OK the
user.
}Daniel
On 11/13/2003 12:08 PM, Madan wrote:
----ser.cfg------------
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
listen=202.71.135.219
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
modparam("auth_radius", "service_type", 15)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
#modparam("acc", "log_level", 1)
#modparam("acc", "radius_flag", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (method=="REGISTER") {
log(1, "REGISTER: Authenticating user\n");
if (!radius_www_authorize("")) {
log(1, "REGISTER: challenging user\n");
www_challenge("", "2");
break;
};
save("location");
break;
};
if (method=="INVITE") {
log(1, "INVITE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="MESSAGE") {
log(1, "MESSAGE\n");
setflag(1); /* set for accounting (the same value as in
log_flag!) */
};
if (method=="BYE" || method=="CANCEL") {
log (1, "BYE or CANCEL\n");
setflag(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
if (!t_relay()) {
sl_reply_error();
break;
};
}
-----------------logs---------
0(13437) mod_init(): Database connection opened successfuly
acc - initializing
0(0) INFO: udp_init: SO_RCVBUF is initially 65535
0(0) INFO: udp_init: SO_RCVBUF is finally 262142
2(13439) INFO: fifo process starting: 13439
2(13439) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
0(13437) REGISTER: Authenticating user
0(13437) REGISTER: challenging user
0(13437) REGISTER: Authenticating user
0(13437) REGISTER: challenging user
0(13437) REGISTER: Authenticating user
0(13437) REGISTER: challenging user
i can not get my sipua registered, please help me to get out of this
----- Original Message -----
From: "Daniel-Constantin Mierla"
<Daniel-Constantin.Mierla(a)fokus.fraunhofer.de>
To: "Santosh M Hulkund" <santoshmh(a)indts.com>
Cc: <serusers(a)lists.iptel.org>
Sent: Thursday, November 13, 2003 3:42 PM
Subject: Re: [Serusers] Integrating Ser to Jabberd
Hello,
try with this one:
http://www.iptel.org/ser/doc/jabgw/xjab-manual.html
Best regards,
}Daniel
On 11/13/2003 8:01 AM, Santosh M Hulkund wrote:
Hi Gurus,
Is there any clear document on integrating ser with jabberd.
Any pointers, greatly appreciated.
Regards,
Santosh M Hulkund
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers