21 Nov
2022
21 Nov
'22
1:41 p.m.
Hi Daniel-Constantin,
I just found this parameter too.
I set it now to 10 seconds, but for example a 30 second expire is only
executed every 40 seconds.
It looks, that I'm not able to set the same entry again inside of the
event_route.
Maybe it is deleted after the event_route is executed.
There should be a check afterards if the entry is still expired before
deleting it.
I found an ugly solution:
I use 2 identical htables and toggle between them:
event_route[htable:expired:userpush1] {
xinfo("[event_route] userpush1 Record expired $shtrecord(key) =>
$shtrecord(value)");
$sht(userpush2=>$shtrecord(key)) = $shtrecord(value);
}
event_route[htable:expired:userpush2] {
xinfo("[event_route] userpush2 Record expired $shtrecord(key) =>
$shtrecord(value)");
$sht(userpush1=>$shtrecord(key)) = $shtrecord(value);
}
It works, but it is ugly.
Thank you for your response.
Bernd
Am 21.11.2022 um 11:34 schrieb Daniel-Constantin Mierla:
Hello,
check the docs of the module, there is a modparam to set the timer
interval, which by default is 20 secods.
Then, to troubleshoot, run with debug=3 and watch the log messages for
hints of what happens. Also, dump the htable via rpc to see its content.
Cheers,
Daniel
On 21.11.22 08:50, Bernd Krueger-Knauber wrote:
> Hi members,
>
> I run into a problemm with htable.
> For user push notifications I need a loop.
>
> So I did the following for a first test:
>
> modparam("htable", "htable",
"user=>size=3;autoexpire=5")
>
> ...
>
>
> event_route[htable:mod-init] {
> xinfo("htable init");
> $sht(user=>testkey) = "testvalue";
> }
>
> event_route[htable:expired:user] {
> xinfo("Record expired $shtrecord(key) => $shtrecord(value)");
> $sht(user=>$shtrecord(key)) = $shtrecord(value);
> }
>
>
> I see the htable init, and I reach Record expired, but only once.
> The 'new' entry
> $sht(user=>$shtrecord(key)) = $shtrecord(value);
> seams not to be re-added, because I never reach the expired event again.
>
> I expected to see cyclic expired events.
> Also strange:
> expire is set to 5 seconds I get:
>
> Nov 21 08:34:50 xxx /usr/sbin/kamailio[254662]: INFO: <script>: htable
> init
> ...
> Nov 21 08:35:10 xxx /usr/sbin/kamailio[254671]: INFO: <script>: Record
> expired testkey => testvalue
>
> If I'm right, this are 20 seconds and not 5.
>
> Any ideas what's wrong?
>
> Best regards
>
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
> sr-users(a)lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only
> to the sender!
> Edit mailing list options or unsubscribe:
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
EDNT GmbH
Werner-von-Siemens-Strasse 7
64625 Bensheim
www.ednt.de
Registergericht: Darmstadt
Registernummer: 24972
Geschäftsführerin: Kerstin Knapp