I have ser.cfg config prettty similar to the
getting started guide, using mediaproxy for natted client.
The only problem that iam going to have is that
when i close a call fromm a client behind NAT i get multiple bye
message:
117.088293 83.211.248.158 -> 195.6x.19x.4x
SIP/SDP Status: 200 OK, with session description
117.263313 195.6x.19x.4x
-> 83.211.248.158 SIP Request: ACK
sip:0681140017@83.211.248.158:61421
120.286678 83.211.248.158 ->
195.6x.19x.4x SIP Request: BYE sip:0828730167@19x.247.16x.9x
120.455192
195.6x.19x.4x -> 83.211.248.158 SIP Status: 200 OK
120.784615
83.211.248.158 -> 195.6x.19x.4x SIP Request: BYE
sip:0828730167@19x.247.16x.9x
120.793092 195.6x.19x.45 -> 83.211.248.158
SIP Status: 200 OK
121.783765 83.211.248.158 -> 195.6x.19x.4x SIP Request:
BYE sip:0828730167@19x.247.16x.9x
121.793036 195.6x.19x.45 ->
83.211.248.158 SIP Status: 200 OK
123.783061 83.211.248.158 ->
195.6x.19x.4x SIP Request: BYE sip:0828730167@19x.247.16x.9x
123.793280
195.6x.19x.45 -> 83.211.248.158 SIP Status: 200 OK
127.783147
83.211.248.158 -> 195.6x.19x.4x SIP Request: BYE
sip:0828730167@19x.247.16x.9x
127.843088 195.6x.19x.45 -> 83.211.248.158
SIP Status: 200 OK
131.782153 83.211.248.158 -> 195.6x.19x.4x SIP Request:
BYE sip:0828730167@19x.247.16x.9x
131.791851 195.6x.19x.45 ->
83.211.248.158 SIP Status: 200 OK
135.388829 195.6x.19x.45 ->
83.211.248.158 UDP Source port: 5060 Destination port:
61421
Seems that the 200 Ok is not hittng the client but
I don't know how to fix this in ser.cfg
Please help.
Regards