Re: [SR-Users] Kamailio 3.0 cann't access the RTPProxy

Hello, ------------------------------------------------------------------------ Date: Thu, 12 Aug 2010 22:16:18 +0200 From: miconda(a)gmail.com To: kevin.jzh(a)hotmail.com CC: sr-users(a)lists.sip-router.org Subject: Re: [SR-Users] Kamailio 3.0 cann't access the RTPProxy Hello, On 8/12/10 8:34 PM, KevinJin wrote: Hello, ------------------------------------------------------------------------ Date: Thu, 12 Aug 2010 18:46:19 +0200 From: miconda(a)gmail.com <mailto:miconda@gmail.com> To: kevin.jzh(a)hotmail.com <mailto:kevin.jzh@hotmail.com> CC: sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> Subject: Re: [SR-Users] Kamailio 3.0 cann't access the RTPProxy Hello, On 8/12/10 4:47 PM, KevinJin wrote: Hi Daniel, What does the log below means? Does it mean nathelper has issue to send the request to RTP proxy first or nathelper doesn't receive a response after sending a request to the rtp proxy? 0(27429) ERROR: nathelper [nathelper.c:2457]: can't send command to a RTP proxy this error is printed when write to socket fails. Do you have any firewall running on the system? Is the user under which kamailio runs allowed to write to sockets? There's no firewall on the system, and I run the kamailio as root, root 26310 1 0 02:24:19 ? 0:00 /usr/local/kamailio-3.0.2/sbin/kamailio -f /usr/local/kamailio-3.0.2/etc/kamail You can edit module_k/nathelper/nathelper.c and replace the line 2457 with: LM_ERR("can't send command to a RTP proxy (%s/%d)\n", strerror(errno), errno); Recompile and reinstall. Hopefully will get more hints about what happens. Here is the error message after the change: 2(26312) ERROR: nathelper [nathelper.c:2457]: can't send command to a RTP proxy(Invalid argument/22) 2(26312) ERROR: nathelper [nathelper.c:2492]: proxy <udp:210.13.124.15:7722> does not respond, disable it 2(26312) ERROR: nathelper [nathelper.c:3144]: no available proxies what could be the cause? hmm, invalid argurment ... try with this line: LM_ERR("can't send command to a RTP proxy (%s/%d) [sock %d (%d), vcnt %d]\n", strerror(errno), errno, rtpp_socks[node->idx], node->idx, vcnt); maybe will give some hints about which value is invalid. Here's the log after the change: 4(14415) ERROR: nathelper [nathelper.c:2457]: can't send command to a RTP proxy (Invalid argument/22) [sock 7 (0), vcnt 18] 4(14415) ERROR: nathelper [nathelper.c:2492]: proxy <udp:210.13.x.y:7722> does not respond, disable it 4(14415) ERROR: nathelper [nathelper.c:3144]: no available proxies Can you try as well with an unix file socket: modparam("nathelper", "rtpproxy_sock", "unix:/tmp/rtpproxy.sock") then start rtpproxy with -s unix:/tmp/rtpproxy.sock 4(17530) INFO: nathelper [nathelper.c:2369]: rtp proxy <unix:/tmp/rtpproxy.sock> found, support for it re-enabled 3(17529) ERROR: nathelper [nathelper.c:2429]: can't send command to a RTP proxy 3(17529) ERROR: nathelper [nathelper.c:2492]: proxy <unix:/tmp/rtpproxy.sock> does not respond, disable it 3(17529) ERROR: nathelper [nathelper.c:3144]: no available proxies Thanks, Kevin I have no solaris (sparc) to try myself... Cheers, Daniel Test env: UA1 (Behind NAT) --------> Kamailio & RTPproxy (Public IP) --------->UA2 (Public IP) Thanks, Kevin Cheers, Daniel 0(27429) ERROR: nathelper [nathelper.c:2492]: proxy <udp:210.13.124.15:7722> does not respond, disable it There's no problem for the resource(CPU, mem etc.) on the server, the load is very low. Thanks in advance! ---------- 0(27429) DEBUG: nathelper [nhelpr_funcs.c:148]: type <application/sdp> found valid 0(27429) ERROR: nathelper [nathelper.c:3144]: no available proxies 0(27429) ERROR: nathelper [nathelper.c:2627]: no available proxies 0(27429) DEBUG: nathelper [nhelpr_funcs.c:148]: type <application/sdp> found valid 0(27429) INFO: nathelper [nathelper.c:2369]: rtp proxy <udp:210.13.124.15:7722> found, support for it re-enabled 0(27429) DEBUG: nathelper [nathelper.c:3196]: proxy reply: 42040 210.13.124.14 0(27429) DEBUG: nathelper [nhelpr_funcs.c:148]: type <application/sdp> found valid 0(27429) ERROR: nathelper [nathelper.c:2457]: can't send command to a RTP proxy 0(27429) ERROR: nathelper [nathelper.c:2492]: proxy <udp:210.13.124.15:7722> does not respond, disable it 0(27429) ERROR: nathelper [nathelper.c:3144]: no available proxies 0(27429) ERROR: nathelper [nathelper.c:2627]: no available proxies Thanks, Kevin ------------------------------------------------------------------------ _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com/ -- Daniel-Constantin Mierla http://www.asipto.com/