look at setflag and acc in serusers archive, also on onsip.org I think there is a guide.
As for tables ...this is a rough guide. so if its slightly off, someone correct :-
+-----------------------+ | Tables_in_ser | +-----------------------+ | acc |
Your accounting details , INVITE, BYE etc etc
| active_sessions |
exactly what it says
| aliases |
You can add a alias here which can be looked up from ser.cfg eg you can assign the username =1111, and in alias assign iqbal to 1111, that way the same user can be called using alias
| config |
Never needed it...so not sure :-)
| domain |
the domains that you support
| event |
again havanet used it | grp |
This is to assign various userID into groups, eg one group could be IPonly, in ser you then check if the user is in group, then route the call appropriately.
| location |
exactly what it says, your location, or should I say your IP phone and its IP address | missed_calls |
what it says | pending |
used by serweb, all new subscribers go into this, waiting for the user to click on confirmation
| phonebook | serweb
| preferences |
dont have this table :-) have preferences_types instead, and again its for serweb
| reserved |
not sure
| server_monitoring | | server_monitoring_agg |
serweb, and I think for something else ... | silo | silo
| subscriber |
your users
| uri |
I thin serweb, but would like some confirmation on this.
| version |
table versions, used when updating to new version of ser
+-----------------------+
Iqbal
Manoj Ghag wrote:
hi, All
I have setup the SER with auth enable for MySQL ( and radius also .. at a time only one is used ) I am able to see that if user is not in database he is not able to login to SOFTPHONE .... Now I want to enable accounting also ,,, as in my case auth is working perfectly fine but accounting is not working ... I have tried all the things ,, but still I am missing somthing ...... please help me ...... as even inserting the acc module in ser.cfg file nothing is getting inserted into database .. in the form of accounting information..
At the same time where can i get the information about .. what is a information stored in each mysql table
*my ser.cfg file is as follows ( where i have compiled ser with all the module enable)*
[root@test ser]# cat ser.cfg # # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" #loadmodule "/usr/local/lib/ser/modules/auth_radius.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- # -- auth_radius params -- #modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("usrloc", "db_mode", 0)
# --domain module-- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("domain", "db_mode", 1) #modparam("domain", "domain_table", "domain") #modparam("domain", "domain_col", "domain") # --acc params-- modparam("acc", "log_level", 1) modparam("acc", "log_flag", 2) #modparam("acc", "log_missed_flag", 2) #modparam("acc", "log_fmt", "fimos") #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 2)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=='192.168.1.246') { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("192.168.1.246", "subscriber")) { www_challenge("192.168.1.246", "0"); break; }; save("location"); break; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };}
*Please see teh table list *
[root@test ser]# mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 376 to server version: 3.23.58 Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> use ser Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> show tables -> ; +-----------------------+ | Tables_in_ser | +-----------------------+ | acc | | active_sessions | | aliases | | config | | domain | | event | | grp | | location | | missed_calls | | pending | | phonebook | | preferences | | reserved | | server_monitoring | | server_monitoring_agg | | silo | | subscriber | | uri | | version | +-----------------------+ 19 rows in set (0.00 sec)
Yahoo! Mail Mobile Take Yahoo! Mail with you! http://us.rd.yahoo.com/mail_us/taglines/mobile/*http://mobile.yahoo.com/learn/mail Check email on your mobile phone.
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers