Re: [SR-Users] Routing calls to a subscribed softphone

Hi Will, It sounds like your kamailio.cfg is not looking up the user location database before trying to relay the INVITE. There is a relevant section in the kamailio-basic.cfg example configuration file: request_route { ... # user location service route(LOCATION); } ... # USER location service route[LOCATION] { if (!lookup("location")) { $var(rc) = $rc; t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } route(RELAY); exit; } The logic is that if the call is for a local registered user whose location is available in the "kamctl ul" then request_route() should pass the request to the route(LOCATION) routine. The function call lookup("location") then does the magic if matching the address of record ([subscriber_name]@[our_domain_name]) and returning the $ruri of the registered phone ([realid]@[realip]). route(RELAY) is then able to send the call on to the phone's actual IP address. Hope that helps. Paul Smith On 02/10/14 03:33, Will Ferrer wrote: Hi I was wondering if any one had any advice or examples for me of how to get a call to be routed to a subscribed softphone. We have 2 boxes in our testing deployment, a load balancer / sbc and a call processing box. Calls come in to the sbc, and then are passed to the call processing box. The call is analyzed and the branch uri is rewritten to a destination address when applicable for the call (this is how we handle routing of calls to certain numbers -- we do this utilizing custom code and a custom db). This works just fine when the destination sip uri is phone number (in which case we do lcr) or if the destination goes to a remote address. However when the destination is a subscriber: sip:[subscriber_name]@[our_domain_name], the call is passed back to the sbc, which passes it to the callprocessing box, back and forth until a too many hops error occurs. The subscriber I am trying to send the call too does show up under "kamctl ul show". I feel like there is something basic I must be missing here. Does any one have any advice for me? Thank you very much in advance. All the best. Will Ferrer _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users