Morning Daniel:
Thank you very much for your response!
As for the routing explanation, I am afraid, I couldn't narrate the issue. I rephrase
it, here below:
1: By default Kamailio listens on all interfaces (implying that it has knowledge of all
interfaces and corresponding subnets, please correct me if wrong.
2: A packet arriving at say 10.10.10.1/8 will be processed by the corresponding
module....
3: A packet destined for 192.168..1.15/24 (say our PSTN GW/ MGC) how will it be routed?
Wil it be sent on all interfaces wlan0 (above) and eth0 with same subnet as eth0 or only
sent out via eth0?
Thanks again!
KR,
Zaka
________________________________________
From: sr-users-bounces(a)lists.sip-router.org [sr-users-bounces(a)lists.sip-router.org] on
behalf of Daniel-Constantin Mierla [miconda(a)gmail.com]
Sent: Monday, September 29, 2014 9:36 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Kamailio -PSTN Gateway
Hello,
On 24/09/14 08:44, Zaka Ul Isam wrote:
Hello Folks:
Please help with above, I have browsed and tried various suggestions on this list without
much luck!
I think problem can be reduced to three questions ;)
1: Apart from DEFINE WITH PSTN directive, do I need certain modules to be compiled?
(DIALPLAN, CARRIERROUTE, LCR aso) If yes, then we ought to put up a list of modules
required for each task/ activity.....
if you have only a pstn gateway, it is not
necessary to add extra modules.
If you have more, makes sense to get lcr or an alternative, the right
place with be to replace some of the content in route PSTN with
functions from the new module.
2: How Kamailio core decides the call routing? i.e: based on dialed digits as specified
in dialplan .
# - update the condition to match your dialing rules for PSTN routing
if(!($rU=~"^(\+|00355)[0][4-9]{3,20}$"))
return;
Yes, in the case of default config file, but you can
change that as
needed by you. Default config file was made mainly to give an example of
routing to PSTN, but can be update to match your rules for sending to PSTN.
&&
#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "10.1.6" desc "PSTN GW Address"
pstn.gw_port = "5080" desc "PSTN GW Port"
#!endif
3: If Kamailio is listening on say wlan0 interface 10.42.0.1:5060 (Ubuntu HOT SPOT) can
it route to PSTN Gateway/ Softswitch on P2P1 (Eth0) without Bridging? Put another way,
does kernel route towards the specified interface or Kamailio is capable of routing based
on active routing cache?
This is a matter of your routing rules in kernel. Also, if
you do
natting there, the PSTN gateway must be able to do nat traversal for rtp.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda -
http://www.linkedin.com/in/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
________________________________
Albtelecom & Eagle Mobile ju ftojnë të mbrojmë së bashku Mjedisin. Lutemi të mos e
printoni këtë komunikim elektronik nëse nuk është me të vërtetë i nevojshëm.
Albtelecom & Eagle Mobile invite you to protect together the Environment. Please do
not print this e-mail unless really necessary.
________________________________
This e-mail and any files transmitted with it are confidential and intended solely for the
use of the addressee/s. If you are not the intended recipient you are hereby notified that
any dissemination, forwarding, copying or use of any of the information is strictly
prohibited. If you receive this e-mail in error, please notify the sender immediately and
delete it! Albtelecom makes no warranty as to the accuracy or completeness of any
information contained in this message and hereby excludes any liability of any kind for
the information contained therein or for the information transmission, reception, storage
or use of such in any way whatsoever. The opinions expressed in this message may belong to
sender alone and may not necessarily reflect the opinions of Albtelecom. Albtelecom shall
bear no liability for any loss or damage caused by software or e-mail viruses.
Ky mesazh dhe çdo informacion i transmetuar në përmbajtje te këtij mesazhi është
konfidencial dhe është i destinuar vetëm për marrësin e destinuar. Nëse nuk jeni marrësi i
destinuar, Ju bëjmë me dije se çdo përhapje, transmetim, kopjim apo përdorim i çdo
informacioni është i ndaluar. Nëse e merrni këtë mesazh gabimisht, ju lutem kontaktoni
urgjentisht nisësin e tij dhe fshijeni atë. Albtelecom nuk jep asnjë garanci për saktësinë
apo plotësinë e informacionit në përmbajtje të këtij mesazhi dhe nuk mban asnjë
përgjegjësi për informacionin e përmbajtur, transmetimin, marrjen, ruajtjen apo përdorimin
e tij në çfarëdolloj mënyre. Mendimet e shprehura në këtë mesazh mund t'i përkasin
vetë nisësit dhe nuk mund të reflektojnë domosdoshmërisht qëndrimet e Albtelecom.
Albtelecom nuk do të mbaje asnjë përgjegjësi për humbje ose dëme te shkaktuara nga
programet apo viruset.