Re: [Serusers] messed up with config

restart ser and reboot the phones too...u must have done it once ...empty location table also...and see ngrep output >From: "Madan" <madan.r(a)net4india.net> >To: "Kapil Dhawan" <sersavvy(a)hotmail.com> >Subject: Re: [Serusers] messed up with config >Date: Fri, 13 Feb 2004 13:57:28 +0530 > >noisy feedback and too many hops > >----- Original Message ----- >From: "Kapil Dhawan" <sersavvy(a)hotmail.com> >To: <madan.r(a)net4india.net> >Cc: <serusers(a)lists.iptel.org> >Sent: Friday, February 13, 2004 1:40 PM >Subject: RE: [Serusers] messed up with config > > > > whats the error you are getting > > > > > > >From: "Madan" <madan.r(a)net4india.net> > > >To: <serusers(a)lists.iptel.org> > > >Subject: [Serusers] messed up with config > > >Date: Fri, 13 Feb 2004 13:36:23 +0530 > > > > > >hi > > >can somebody tell whats wrong with my cfg , as i can not make/recieve >calls > > >now..seems i have played too much it and now m confused as to what

> > >wrong and where > > > > > > > > ># > > ># ----------- global configuration

> > >debug=9 # debug level (cmd line: -dddddddddd) > > >fork=no > > >log_stderror=yes # (cmd line: -E) > > >listen=localhost > > >/* Uncomment these lines to enter debugging mode > > >debug=7 > > >fork=no > > >log_stderror=yes > > >*/ > > > > > >check_via=no # (cmd. line: -v) > > >dns=no # (cmd. line: -r) > > >rev_dns=no # (cmd. line: -R) > > >port=5060 > > >children=4 > > >fifo="/tmp/ser_fifo" > > > > > ># ------------------ module

> > > > > ># Uncomment this if you want to use SQL database > > >loadmodule "/usr/local/lib/ser/modules/mysql.so" > > >loadmodule "/usr/local/lib/ser/modules/sl.so" > > >loadmodule "/usr/local/lib/ser/modules/tm.so" > > >loadmodule "/usr/local/lib/ser/modules/rr.so" > > >loadmodule "/usr/local/lib/ser/modules/maxfwd.so" > > >loadmodule "/usr/local/lib/ser/modules/usrloc.so" > > >loadmodule "/usr/local/lib/ser/modules/registrar.so" > > >loadmodule "/usr/local/lib/ser/modules/uri.so" > > >loadmodule "/usr/local/lib/ser/modules/auth.so" > > >loadmodule "/usr/local/lib/ser/modules/auth_db.so" > > >loadmodule "/usr/local/lib/ser/modules/acc.so" > > >loadmodule "/usr/local/lib/ser/modules/auth_radius.so" > > >loadmodule "/usr/local/lib/ser/modules/group_radius.so" > > > > > > > > ># ----------------- setting module-specific

> > > > > ># -- usrloc params -- > > > > > >modparam("usrloc", "db_mode", 2) > > >modparam("auth_radius", > > >"radius_config","/usr/local/etc/radiusclient/radiusclient.conf") > > >#modparam("auth_radius", "service_type", 15) > > > > > ># -- rr params -- > > ># add value to ;lr param to make some broken UAs happy > > >modparam("rr", "enable_full_lr", 1) > > >modparam("acc", "log_level", 1) > > >modparam("acc", "radius_flag", 1) > > > > > ># ------------------------- request routing

> > ># main routing logic > > > > > >route{ > > > # initial sanity checks -- messages with > > > # max_forwards==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > break; > > > }; > > > if (msg:len > max_len ) { > > > sl_send_reply("513", "Message too big"); > > > break; > > > }; > > > > > > > > > > > ># we record-route all messages -- to make sure that > > ># subsequent messages will go through our proxy; that's > > ># particularly good if upstream and downstream entities > > ># use different transport protocol > > > > > > record_route(); > > > > > > # loose-route processing > > > if (loose_route()) > > > { > > > t_relay(); > > > break; > > > }; > > > > > > > > > > > ># if the request is for other domain use UsrLoc > > ># (in case, it does not work, use the following command > > ># with proper names and addresses in it) > > > if (uri==myself) > > > { > > > lookup("aliases"); > > > > > > > > > if (method=="REGISTER") { > > > > > > log(1, "REGISTER: Authenticating user\n"); > > > > > > if (!radius_www_authorize("")) { > > > log(1, "REGISTER: challenging

########################################################################### ########################################################################### _________________________________________________________________ Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!