Hi,
I am having problem with configuring FreeRadius to authenticate suername and password. I have tried to test freeradius with a test client and it works by sending the following message:
Ready to process requests.
        User-Name = "1005@192.168.1.104"
        User-Password = "1234"
        Service-Type = Authenticate-Only
        NAS-Port = 0
        NAS-IP-Address = 127.0.0.1

The message that is sent by Openser is as follows:
Waking up in 1.9 seconds.
        User-Name = "1005@192.168.1.104"
        Digest-Attributes = 0x0a0631303036
        Digest-Attributes = 0x010f3139322e3136382e312e313034
        Digest-Attributes = 0x022a34383364376265396630623738663734363935343562386366373865303561316161623032633366
        Digest-Attributes = 0x04137369703a3139322e3136382e312e313034
        Digest-Attributes = 0x030a5245474953544552
        Digest-Response = "eb5f24a5563e9c1096855ef8b2c72d2b"
        Service-Type = IAPP-Register
        X-Ascend-PW-Lifetime = 825241654
        NAS-Port = 5060
        NAS-IP-Address = 127.0.0.1

Freeradius can't find the password and is reject users as a result of that. Also, is the Service-Type supposed to be Authenticate-Only instead?
Is this something to do with my openser.cfg setup that is causing the problem?

Thanks in advance for your help.

Regards,
Pete