14 Jul
2008
14 Jul
'08
1:28 p.m.
TLS uses a different port than TCP. TCP is 5060 and TLS is 5061.
Regards,
Bogdan
pravin.swami(a)wipro.com wrote:
Hi Bogdan-Andrei Iancu,
Thanks for your reply .
When Sending a INVITE request without (no-TLS) proxy establishes TCP
connection successfully & call Succeeds.
But, when tried INVITE with (TLS) proxy fails to establish TCP
connection & get the below error.
Am I missing something??
Is there any configurable parameter which has to be used in ser.cfg
Regards,
Pravin.swami
-----Original Message-----
From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro]
Sent: Monday, July 14, 2008 2:02 PM
To: Pravin Sidram swami (WT01 - MCE-Mobile Devices)
Cc: users(a)lists.openser.org
Subject: Re: [OpenSER-Users] FW: OpenSER 1.3.2-tls - error
tcp_blocking_connect
Hi,
The error message specks for it self :
Connection refused
So, your OpenSER tried to open a TCP/TLS connection to an address where
nobody was listening.
Regards,
Bogdan
pravin.swami(a)wipro.com wrote:
Hi... All ,
I have Configured OpenSER 1.3.2-tls source code & compiled
successfully .
Registration is successful with TLS handshake .
Below is the scenario of my test .
UA1 & UA2 clients Registers on TLS.
When UA1 send INVITE request to UA2
I got the Following Error :
: SIP/2.0 477 Send failed (477/TM)
When i scanned through the logs of openser I got the following Message
: proxy always trying to establish TCP connection
but it Fails.
Jul 11 23:55:20 [22415] DBG:core:check_via_address: params
10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415]
DBG:core:tcp_send: no open tcp connection found, opening new one Jul
11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: poll error:
flags 18
Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: failed to
retrieve SO_ERROR (111) Connection refused Jul 11 23:55:20 [22415]
ERROR:core:tcpconn_connect:
tcp_blocking_connect failed
Jul 11 23:55:20 [22415] ERROR:core:tcp_send: connect failed Jul 11
23:55:20 [22415] ERROR:tm:msg_send: tcp_send failed Jul 11 23:55:20
[22415] ERROR:tm:t_forward_nonack: sending request failed Jul 11
23:55:20 [22415] DBG:tm:t_relay_to: t_forward_nonack returned error
Jul 11 23:55:20 [22415] DBG:core:parse_headers: flags=ffffffffffffffff
> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params
> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415]
> DBG:tm:run_trans_callbacks: trans=0xb5db7e50, callback type 128, id 0
> entered
> ACC: call missed:
> timestamp=1215800720;method=INVITE;from_tag=20282693445eido3yklvo4;to_
> tag=;call_id=8307080595eido3erlzgw;code=477;reason=Request
> Failure
>
> - Presently i don't have any DNS server , is that
> really matters ??
> - While openser tries to open TCP connection with
> UAS it's sending port ' 0 ' , but fails is it ok .?? , or Anything
> I'm missing in Configuration .
> I have Attahced config file Also.
>
> Thanks & Regards,
> Pravin.swami
>
>