Re: [Serusers] rpid again

Hi list ! I have a Problem with the appending of an rpid with the functions avp_load_radius(), append_rpid_hf(). In my Radius DB i have an SIP-AVP field which is filled with the Value rpid:[NUMBER] When i run manuall the Radius Reply-Query i get the correct value for SIP-AVP. Now, i reconfigured my ser.cfg so that an avp_load_radius() is executed after an incoming INVITE. My Radius is answering on the command and sends the correct SIP-AVP Value for the User. Now my Problem: I can't append the RPID or anything else to the SIP-Header after the answer from the Radius. So the call is going out without the rpid in the Header. Can anyone help me ? Here is the Configure-Snip: if (method=="INVITE") { # here comes the invite if (!radius_proxy_authorize("")) { # for the digest avp_load_radius it seems that i must use an proxy auth proxy_challenge("","0"); # and an proxy challenge if(!avp_load_radius("digest")) { # here i get the SIP-AVP from the radius log(1,"Failure with the AVP-Value\n"); # if it fails i'll get a message break; # go out } avp_print(); # print all avp's (this command is never executed :( ) append_hf ("Remote-Party-ID: 111222333\r\n"); # append this silly row - it is never executed append_rpid_hf("", ";party=calling;id-type=subscriber;screen=yes"); # append the rpid from SIP-AVP - and this command is also never executed break; # go out }; route(3); # go to route block 3 break; # end } I tried also this snippet without the breaks and proxy-commands but it doesn't work. I don't know what is wrong - please help me :s Thanks ! Dirk _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers