7 Nov
2018
7 Nov
'18
1:28 a.m.
Hardly a guess, just experience, lol
You're welcome.
On Tue, Nov 6, 2018 at 5:24 PM Kevin Olbrich <ko(a)sv01.de> wrote:
Am Di., 6. Nov. 2018 um 23:09 Uhr schrieb Sergiu
Pojoga <pojogas(a)gmail.com
Since you are using Kamailio for auth/usrloc, sending its REGISTER with
:
I would assume the phone sends multiple REGISTER
requests with same
CallID, one or more of which has an expire=0, as a NAT traversal technique
trying to discover its public IP at first. May be it doesn't do it very
well.
I have checked again and indeed, correct guess!
expire=0 would indicate that the Kamailio contact
has expired (probably
after such a request was received from the phone). Try checking it with
'kamctl ul show'
Correct as well, endpoint is not listed there.
I will check if I can get debug from the phone.
Thank you very much!
Kevin
On Tue, Nov 6, 2018 at 4:57 PM Henning Westerholt
<hw(a)kamailio.org>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Am Dienstag, 6. November 2018, 22:50:54 CET
schrieb Kevin Olbrich:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Am Di., 6. Nov. 2018 um 22:40 Uhr schrieb Sergiu
Pojoga <
pojogas(a)gmail.com>gt;:
> It's not clear what kamailio/asterisk
integration method you are
using.
> Looking at the 2 provided messages - the 2nd
one is not a relay of
the 1st
> one.
I might have matched the wrong transaction. I use HEP/HOMER to observe
communication and Kamailio starts a new flow (=Call-Id) to asterisk
(this
message is no coming from the phone).
> handle authentication/usrloc in Kamailio?
> or
> using PATH extension?
I do auth + usrloc in Kamailio, no PATH.
Maybe the Kamailio debug would lead me to the problem but verbose
level 3
has too much info.
Hi Kevin,
you could control the time when the specific not-working phone send a
REGISTER. Then you can enable the debugging for a few seconds during
this
time, and then deactivate it again. This should work even on a
production
server. Debugging it on a test server is of course an even better way.
Best regards,
Henning
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://skalatan.de/services
Kamailio security assessment - https://skalatan.de/de/assessment
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users