2010-11-05 09:31 keltezéssel, Alex Balashov írta:

On 11/05/2010 04:10 AM, MÉSZÁROS Mihály wrote:

Hello all!

Is there any known problem to run multiple kamailio/sip-router instance
in one host.
I need this to handle multidomain situation.

The multidomain what is built in is not satisfactory, because the UA-s
what are from varying vendors.
And some has strange or a very limited SIP implementation.
Some can only register ip address, some can use RFC3263, but some can
use only DNS A record. :(

Any answer, suggestion appreciated very well!

I still don't see why handling multiple domains in a single instance would be a problem.

I will try to explain where i saw the problem.
Of course it can be that i am wrong, so AFAIK ..


If there is domain atlanta.test with with such a DNS.

$TTL    60
$ORIGIN atlanta.test.
@       IN      SOA     a1.atlanta.test. root.a1.atlanta.test. (
                     2009071301         ; Serial
                         604800         ; Refresh
                          86400         ; Retry
                        2419200         ; Expire
                         604800 )       ; Negative Cache TTL
;
@               IN      NS      a1
@               IN      NS      a2
a1              IN      A       192.168.0.1
a2              IN      A       192.168.0.2
;;                              order   pref    flags   service        regexp replacement
@               IN      NAPTR   10      10      "s"     "SIPS+D2T"     ""     _sips._tcp
@               IN      NAPTR   20      10      "s"     "SIP+D2T"      ""     _sip._tcp
@               IN      NAPTR   30      10      "s"     "SIP+D2U"      ""     _sip._udp
;;                              Priority        Weight  Port    Target
_sips._tcp      IN      SRV     10              0       5061    a1
_sips._tcp      IN      SRV     20              0       5061    a2
_sip._tcp       IN      SRV     10              0       5060    a1
_sip._tcp       IN      SRV     20              0       5060    a2
_sip._udp       IN      SRV     10              0       5060    a1
_sip._udp       IN      SRV     20              0       5060    a2

• UA type1
  It is implementing RFC3263 correctly. (Very rare such a good implementation.)
  so it will send a register
  REGISTER atlanta.test
  To:alice@atalnta.test
• Correctly this client will use the proxy preference and in best case use tcp + tls.
  
• UA2
  It is implementing only dns A record support.
  so it will send a register
  REGISTER a1.atlanta.test
  To: alice@a1.atlanta.test
• UA3
  It is a strange UA resolves everything to ip address.
  so it will send the register
  REGISTER 192.168.0.1
  To: alice@192.168.0.1
  
• UA4
  Maybe there are more case, and can be continued. But till now i faced only to the above three cases.
  

Where i saw the problem with kamailio multidomain setup (AFAIK):
I want to use the three as one "sip routing domain" or i don't know how to name it correctly.
When it saves the AoR <=> Contact bindings to location database (mysql), the registrar will create and save the contacts to three separated domain according to the above three UA behavior:

• atlanta.test
• a1.atlanta.test
• 192.168.0.1

So i must add three times the user in subscriber table for the three domain, to allow the user alice to authenticate from any UA.
And i will have three domain in location database for only one "sip routing domain".

So if i want to have a second domain, called biloxi.test with similar setup, on the same host where atlanta.test is,
then i get bigger mess. And i have six domain...
I hope you see where i have a problem.
And AFAIK i can't set to registrar function save() the domain, if i use database backend.

Highly appreciated if You can suggest a solution for this.
It will be nice if you, or anyone can suggest some solution to this problem.

Many Thanks!

Cheers,
Misi

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users