Did you update to Ser 0.8.12 & Sems ser_rel_0_8_12 ? Could send me all the logs (Ser+Sems)?
-Raphael.
----- Original Message ----- From: "Kapil Dhawan" sersavvy@hotmail.com To: serusers@lists.iptel.org Sent: Tuesday, February 24, 2004 12:19 PM Subject: RE: [Serusers] SER + SEMS
Hi I have got some improvement...now i am getting voicemail in my email
but
after sending one email...i again get Wrong FIFO and then if i restart my sems and ser...it works for one more time.......same case always
From: "Kapil Dhawan" sersavvy@hotmail.com To: serusers@lists.iptel.org Subject: RE: [Serusers] SER + SEMS Date: Tue, 24 Feb 2004 09:35:39 +0000
I have tried to debug all this
this is what i get] (1185) DEBUG: run (AmServer.cpp:165): version= <0.2> (1185) DEBUG: run (AmServer.cpp:170): fct_name= <sip_request.voicemail> (1185) DEBUG: execute (AmServer.cpp:229): cmd.method= <INVITE> (1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111> (1185) DEBUG: execute (AmServer.cpp:231): cmd.email= kdhawan@primus-direct.com (1185) DEBUG: execute (AmServer.cpp:232): cmd.domain= <203.196.128.126> (1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip= <203.196.128.126> (1185) DEBUG: execute (AmServer.cpp:234): cmd.port= <> (1185) DEBUG: execute (AmServer.cpp:235): cmd.r_uri= sip:1111@203.196.128.126;user=phone (1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri= sip:3333@203.196.128.122:5060;user=phone;transport=udp (1185) DEBUG: execute (AmServer.cpp:237): cmd.from= <sip:3333@203.196.128.126;user=phone > (1185) DEBUG: execute (AmServer.cpp:238): cmd.to= <sip:1111@203.196.128.126;user=phone> (1185) DEBUG: execute (AmServer.cpp:239): cmd.callid= 04807096-50cc-1ba2-4fb4-0038cd0004f6@203.196.128.122 (1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag= <32351> (1185) DEBUG: execute (AmServer.cpp:241): cmd.to_tag= <> (1185) DEBUG: execute (AmServer.cpp:244): cseq_str= <8> (1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8) (1185) DEBUG: execute (AmServer.cpp:251): cmd.key= <31558:1504541206> (1185) DEBUG: execute (AmServer.cpp:252): cmd.route= <> (1185) DEBUG: execute (AmServer.cpp:253): cmd.next_hop= <> (1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0 Session-Expires: 1800 Min-SE: 1800 ' (1185) DEBUG: execute (AmServer.cpp:266): body: `v=0 o=SS-TA101 23265 23265 IN IP4 203.196.128.122 s=- c=IN IP4 203.196.128.122 t=0 0 m=audio 54321 RTP/AVP 0 8 18 4 96 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:18 G729/8000 a=rtpmap:4 G723-63/8000 a=rtpmap:96 telephone-event/8000 a=fmtp:96 0-11 ' (1185) DEBUG: execute (AmServer.cpp:277): everything is OK ! (1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for user '1111': kdhawan@primus-direct.com (1185) DEBUG: startSession (AmSession.cpp:435): Starting session...
(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6@203.196.128.12232351,sess_key=00
0004A12F57B1AE)
(1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute definition 'fmtp:96 0-11' (1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0 (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:vm_reply:000004A7166E92A0 180 ringing 31558:1504541206 000004A12F57B1AE Contact: sip:1111@203.196.128.126 . .
(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns ret=getReturnCode=0 (1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random local
port
(1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set to 35226 (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:vm_reply:000004A756924871 200 OK 31558:1504541206 000004A12F57B1AE Contact: sip:1111@203.196.128.126 Content-Type: application/sdp . v=0 o=username 0 0 IN IP4 203.196.128.126 s=session c=IN IP4 203.196.128.126 t=0 0 m=audio 35226 RTP/AVP 0 a=rtpmap:0 PCMU/8000 .
(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200 fifo_t_reply succeeded (1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <> (1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <> (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns ret=getReturnCode=0 (1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set to 203.196.128.122:54321 (1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to 203.196.128.122/54321 (1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting sending announce...(/usr/local/lib/sems/audio/default.wav) (1191) DEBUG: trying to read WAV file (1191) DEBUG: tag = <RIFF> (1191) DEBUG: file size = <129710> (1191) DEBUG: tag = <WAVE> (1191) DEBUG: tag = <fmt > (1191) DEBUG: chunk_size = <18> (1191) DEBUG: fmt = <01> (1191) DEBUG: channels = <1> (1191) DEBUG: rate = <8000> (1191) DEBUG: bits/sample = <16> (1191) DEBUG: tag = <fact> (1191) DEBUG: chunk size = <4> (1191) DEBUG: tag = <data> (1191) DEBUG: chunk size = <129660>
ERROR ERROR ERROR
(1185) DEBUG: run (AmServer.cpp:165): version= <> (1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version.
(1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding 260 bytes (packet size=320) (1191) DEBUG: convert (AmAudio.cpp:208): end of stream (1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce
reaches
its end. (1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6@203.196.128.122.wav) (1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished recording message (1191) DEBUG: sendToFIFO (AmRequest.cpp:199): msg=<:t_uac_dlg:000004A7326ED90A BYE sip:3333@203.196.128.122:5060;user=phone;transport=udp . From: sip:1111@203.196.128.126;user=phone;tag=000004A12F57B1AE To: sip:3333@203.196.128.126;user=phone ;tag=32351 CSeq: 9 BYE Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6@203.196.128.122 Contact: sip:1111@203.196.128.126 . .
(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed (1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 481 Call Leg/Transaction Does Not Exist (1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns ret=getReturnCode=0 (1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call Leg/Transaction Does Not Exist (1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data size:
0
(1191) DEBUG: sadSession (AmSession.cpp:309): searching for session to destroy
(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6@203.196.128.12232351,sess_key=00
0004A12F57B1AE)
(1191) DEBUG: findSession (AmSession.cpp:373): session found with key (1191) DEBUG: destroySession (AmSession.cpp:331): sess_it != a_sessions.end() (1191) DEBUG: destroySession (AmSession.cpp:334): it != sess_it->second.end() (1191) DEBUG: destroySession (AmSession.cpp:341): session found: stopping session (1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner trying to stop 80c8e18 (1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to
post
event (1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event posted (1191) DEBUG: destroySession (AmSession.cpp:343): session stopped and destroyed (#sessions=0) (1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its work (1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been
destroyed'
(1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished
From: "Kapil Dhawan" sersavvy@hotmail.com To: serusers@lists.iptel.org Subject: [Serusers] SER + SEMS Date: Tue, 24 Feb 2004 07:29:16 +0000
Hi All...
i am running SER perfectly....Now i am facing problem with running SEMS....
i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems 0.11)
i
am unable to do anything....
whats happening is....
my SER is already installed.....and working...now i am compiling it with vm module and making Multi Domain off (in 0.8.11) and its off in 0.8.12
as
it depends upon domain module there....so no problem with multidomain support...so it works fine...following is the code of ser.cfg
if(method=="ACK" || method=="INVITE" || method=="BYE"){ if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create newtransaction"); break; };
if(!vm("/tmp/am_fifo", "voicemail")){ lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC
DB
if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; };Next....is i am compiling current version of sems...from cvs with following command
CVSROOT=:pserver:anonymous@cvs.berlios.de:/cvsroot/sems export CVSROOT cvs co answer_machine
now it also gets compiled with one or two erros of audio file paths etc...which i corrected in /etc/sems/sems.conf and enaled voicemail
module
in it..
Now when i run it sems -D 3 -E
it shows me sems started successsfully.....but when i try and give a
call
so that it shud be transfered to voicemail...in sems log i see ## Wrong FIFO Interface version ##
due to which ...my wav file which is getting stored in /tmp folder is having 44 bytes size always...i know there is version conflict...but i
am
unable to get proper matching versions of both.............
kidly help me out...if u need i can attach any more info too...
kapil
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
INDIA TODAY @ Rs. 5 + a free gift ! http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html Subcribe Now ...
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers