Not quite sure if cpled is sending the message. Can
you ngrep the sip message? If it sends from localhost,
need to use option "-d lo". A good cpl-c register log
is like this, (mime found 3, 4, not 0, 0)
DEBUG:cpl_process_register: Content-Type mime found 3,
4
DEBUG:cpl_process_register: carrying CPL -> look at
Content-Disposition
*** Disposition type=<script>[6]
*** DIsposition param: <action>[6]=<store>[5]
is_quoted=0
DEBUG:cpl-c:get_dest_user: tring to get user from
new_uri
DEBUG:cpl-c:get_dest_user: tring to get user from
R_uri
DEBUG:cpl-c:get_dest_user: tring to get user from To
parse_headers: flags=-1
DEBUG:cpl:write_to_db:User 123(a)test.org already in CPL
database -> update
parse_headers: flags=-1
check_via_address(66.1.2.3, 127.0.0.1, 0)
--- ser die <serdiehard(a)yahoo.com> wrote:
hello richard
still it gives the fial cpl registering
the total log is
6(17988) SIP Request:
6(17988) method: <REGISTER>
6(17988) uri: <sip:xxx.xxx.net:5060>
6(17988) version: <SIP/2.0>
6(17988) parse_headers: flags=1
6(17988) end of header reached, state=5
6(17988) parse_headers: Via found, flags=1
6(17988) parse_headers: this is the first via
6(17988) After parse_msg...
6(17988) preparing to run routing scripts...
6(17988) DEBUG : is_maxfwd_present: searching for
max_forwards header
6(17988) parse_headers: flags=128
6(17988) end of header reached, state=9
6(17988) DEBUG: get_hdr_field: <To> [32];
uri=[sip:214103@xxx.xxx.net]
6(17988) DEBUG: to body [<sip:214103@xxx.xxx.net>]
6(17988) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
6(17988) DEBUG: get_hdr_body : content_length=0
6(17988) found end of header
6(17988) DEBUG: is_maxfwd_present: max_forwards
header not found!
6(17988) check_via_address(202.*.*.84, 202.*.*.84,
0)
6(17988) parse_headers: flags=256
6(17988) find_first_route(): No Route headers found
6(17988) loose_route(): There is no Route HF
6(17988) check_self - checking if host==us: 17==9
&&
[
xxx.xxx.net] == [127.0.0.1]
6(17988) check_self - checking if port 5060 matches
port 5060
6(17988) check_self - checking if host==us: 17==13
&&
[
xxx.xxx.net] == [202.*.*.19]
6(17988) check_self - checking if port 5060 matches
port 5060
6(17988) check_self - checking if host==us: 17==9
&&
[
xxx.xxx.net] == [127.0.0.1]
6(17988) check_self - checking if port 5060 matches
port 5060
6(17988) check_self - checking if host==us: 17==13
&&
[
xxx.xxx.net] == [202.*.*.19]
6(17988) check_self - checking if port 5060 matches
port 5060
6(17988) parse_headers: flags=4096
6(17988) pre_auth(): Credentials with given realm
not
found
6(17988) build_auth_hf(): 'WWW-Authenticate: Digest
realm="xxx.xxx.net",
nonce="411b3c2eeb0cedfb65da5f5a2fd9dc5a849c920b"
'
6(17988) parse_headers: flags=-1
6(17988) check_via_address(202.*.*.84, 202.*.*.84,
0)
6(17988) receive_msg: cleaning up
7(17994) SIP Request:
7(17994) method: <REGISTER>
7(17994) uri: <sip:xxx.xxx.net:5060>
7(17994) version: <SIP/2.0>
7(17994) parse_headers: flags=1
7(17994) end of header reached, state=5
7(17994) parse_headers: Via found, flags=1
7(17994) parse_headers: this is the first via
7(17994) After parse_msg...
7(17994) preparing to run routing scripts...
7(17994) DEBUG : is_maxfwd_present: searching for
max_forwards header
7(17994) parse_headers: flags=128
7(17994) end of header reached, state=9
7(17994) DEBUG: get_hdr_field: <To> [32];
uri=[sip:215104@xxx.xxx.net]
7(17994) DEBUG: to body [<sip:215104@xxx.xxx.net>]
7(17994) get_hdr_field: cseq <CSeq>: <2> <REGISTER>
7(17994) DEBUG: get_hdr_body : content_length=0
7(17994) found end of header
7(17994) DEBUG: is_maxfwd_present: max_forwards
header not found!
7(17994) check_via_address(202.*.*.84, 202.*.*.84,
0)
7(17994) parse_headers: flags=256
7(17994) find_first_route(): No Route headers found
7(17994) loose_route(): There is no Route HF
7(17994) check_self - checking if host==us: 17==9
&&
[
xxx.xxx.net] == [127.0.0.1]
7(17994) check_self - checking if port 5060 matches
port 5060
7(17994) check_self - checking if host==us: 17==13
&&
[
xxx.xxx.net] == [202.*.*.19]
7(17994) check_self - checking if port 5060 matches
port 5060
7(17994) check_self - checking if host==us: 17==9
&&
[
xxx.xxx.net] == [127.0.0.1]
7(17994) check_self - checking if port 5060 matches
port 5060
7(17994) check_self - checking if host==us: 17==13
&&
[
xxx.xxx.net] == [202.*.*.19]
7(17994) check_self - checking if port 5060 matches
port 5060
7(17994) parse_headers: flags=4096
7(17994) pre_auth(): Credentials with given realm
not
found
7(17994) build_auth_hf(): 'WWW-Authenticate: Digest
realm="xxx.xxx.net",
nonce="411b3c2eeb0cedfb65da5f5a2fd9dc5a849c920b"
'
7(17994) parse_headers: flags=-1
7(17994) check_via_address(202.*.*.84, 202.*.*.84,
0)
7(17994) receive_msg: cleaning up
5(17981) SIP Request:
5(17981) method: <REGISTER>
5(17981) uri: <sip:xxx.xxx.net:5060>
5(17981) version: <SIP/2.0>
5(17981) parse_headers: flags=1
5(17981) end of header reached, state=5
5(17981) parse_headers: Via found, flags=1
5(17981) parse_headers: this is the first via
5(17981) After parse_msg...
5(17981) preparing to run routing scripts...
5(17981) DEBUG : is_maxfwd_present: searching for
max_forwards header
5(17981) parse_headers: flags=128
5(17981) end of header reached, state=9
5(17981) DEBUG: get_hdr_field: <To> [32];
uri=[sip:214103@xxx.xxx.net]
5(17981) DEBUG: to body [<sip:214103@xxx.xxx.net>]
5(17981) get_hdr_field: cseq <CSeq>: <3> <REGISTER>
5(17981) DEBUG: get_hdr_body : content_length=0
5(17981) found end of header
5(17981) DEBUG: is_maxfwd_present: max_forwards
header not found!
5(17981) check_via_address(202.*.*.84, 202.*.*.84,
0)
5(17981) parse_headers: flags=256
5(17981) find_first_route(): No Route headers found
5(17981) loose_route(): There is no Route HF
5(17981) check_self - checking if host==us: 17==9
&&
[
xxx.xxx.net] == [127.0.0.1]
5(17981) check_self - checking if port 5060 matches
port 5060
5(17981) check_self - checking if host==us: 17==13
&&
[
xxx.xxx.net] == [202.*.*.19]
5(17981) check_self - checking if port 5060 matches
port 5060
5(17981) check_self - checking if host==us: 17==9
&&
[
xxx.xxx.net] == [127.0.0.1]
5(17981) check_self - checking if port 5060 matches
port 5060
5(17981) check_self - checking if host==us: 17==13
&&
[
xxx.xxx.net] == [202.*.*.19]
5(17981) check_self - checking if port 5060 matches
port 5060
5(17981) check_nonce(): comparing
[411b3c2eeb0cedfb65da5f5a2fd9dc5a849c920b] and
[411b3c2eeb0cedfb65da5f5a2fd9dc5a849c920b]
5(17981) query="select password from subscriber
where
username='214103' AND domain='xxx.xxx.net'"
5(17981) HA1 string calculated:
0984246f25855fa6513a3125ab956f58
5(17981) check_response(): Our result =
'8bdb1022aada3388b8b2ef0f6b0cd150'
5(17981) check_response(): Authorization is OK
5(17981) save_rpid(): rpid value is ''
5(17981) parse_headers: flags=1024
5(17981) DEBUG:parse_content_type_hdr: missing
Content-Typeheader
5(17981) DEBUG:cpl_process_register: Content-Type
mime found 0, 0
5(17981) parse_headers: flags=1048576
5(17981) DEBUG:parse_accept_hdr: missing Accept
header
5(17981) XLOG: xl_print_log: final buffer length 29
5(17981) Error: fail cpl registering
5(17981) receive_msg: cleaning up
=== message truncated ===
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!