30 Jun
2009
30 Jun
'09
12:28 p.m.
please take this patch and try. The other one I just sent included some
work done for nathelper module.
Thanks,
Daniel
On 06/30/2009 11:26 AM, Daniel-Constantin Mierla wrote:
Hello,
On 06/30/2009 09:26 AM, hans(a)onsmail.nl wrote:
--
Daniel-Constantin Mierla
http://www.asipto.com/
I'm still trying to find out why the
fr_inv_timer isn't working
properly.
I tried version 1.5 with a very basic configuration and then the
timeout is sent to early (about half the 'fr_inv_timer' value)
but when running version 1.4 (on the same machine) everything is
working fine and the timeout occures after the amount of seconds
defined by 'fr_inv_timer'.
Anyone any idea what can cause this behavior in 1.5 (and not in 1.4) ?
can you try attached patch?
Thanks,
Daniel
----- Original Message ----- From: <hans(a)onsmail.nl>
To: "Daniel-Constantin Mierla" <miconda(a)gmail.com>
Cc: <users(a)lists.kamailio.org>
Sent: Wednesday, June 10, 2009 20:10
Subject: Re: [Kamailio-Users] strange fr_inv_timer behaviour
Daniel,
loadmodule "tm.so"
modparam("tm", "fr_inv_timer_avp",
"$avp(s:callee_fr_inv_timer)")
modparam("tm", "fr_timer", 3)
$avp(s:callee_fr_inv_timer) = 90;
This setting causes a 408 to be generated after 30 seconds.
If i don't use the avp but set fr_inv_timer directly i have the same
problem.
Kind regards
Hans
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
Hello,
can you send me all tm module parameters you set?
I tried to reproduce, but all was fine:
- 40 sec t/o
INVITE: U 2009/06/10 12:52:54.457315 213.133.111.169:5062 ->
86.121.130.133:6536
408: U 2009/06/10 12:53:35.084385 213.133.111.169:5062 ->
86.121.130.133:5060
- 60 sec t/o
INVITE: U 2009/06/10 12:58:05.806196 213.133.111.169:5062 ->
86.121.130.133:6536
408: U 2009/06/10 12:59:05.644824 213.133.111.169:5062 ->
86.121.130.133:5060
Thanks,
Daniel
On 06/03/2009 05:00 PM, hans(a)onsmail.nl wrote:
> Hi,
>
> When setting ?fr_inv_timer? to 60s and the phone is not answered
> kamailio
> generates a timeout after 20s ? If ?fr_inv_timer? is set to 90s the
> timeout is generated after 30s ?
>
> Doing a level 7 debug I received the following tm timer related
> output
>
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1755]:
> DBG:tm:set_timer: relative timeout is 500000
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1755]:
> DBG:tm:insert_timer_unsafe: [4]: 0xafa6abc4 (16900000)
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1755]:
> DBG:tm:set_timer: relative timeout is 3
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1755]:
> DBG:tm:insert_timer_unsafe: [0]: 0xafa6abe0 (51)
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1754]:
> DBG:tm:set_timer: relative timeout is 60
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1754]:
> DBG:tm:insert_timer_unsafe: [1]: 0xafa6abe0 (108)
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1751]:
> DBG:tm:set_timer: relative timeout is 60
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1751]:
> DBG:tm:insert_timer_unsafe: [1]: 0xafa6abe0 (108)
> Jun 3 15:07:12 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:utimer_routine: timer routine:4,tl=0xafa6abc4 next=(nil),
> timeout=16900000
>
> <phone is ringing ....>
>
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:timer_routine: timer routine:1,tl=0xafa6abe0 next=(nil),
> timeout=108
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:final_response_handler: stop retr. and send CANCEL
> (0xafa6aa78)
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:t_should_relay_response: T_code=180, new_code=408
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:t_pick_branch: picked branch 0, code 408
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:t_check: start=0xafa6aa78
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:t_check: transaction already found!
> Jun 3 15:07:32 sip-proxy-01 /usr/local/sbin/kamailio[1758]:
> DBG:tm:pv_get_tm_reply_code: reply code is <408>
>
> version: kamailio 1.5.1-notls (i386/linux)
> flags: STATISTICS, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
> SHM_MMAP,
> PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
> MAX_URI_SIZE 1024, BUF_SIZE 65535, PKG_SIZE 4194304
> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
> svnrevision: 2:5868M
> @(#) $Id: main.c 5608 2009-02-13 16:48:17Z henningw $
> main.c compiled on 14:40:00 Jun 3 2009 with gcc 4.1.2
>
> Kind regards
> Hans
>
>
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users(a)lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>
>
--
Daniel-Constantin Mierla
http://www.asipto.com/
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users