Hi,
I have the ethereal traces for the load run on SER. The
180 Ringing received from remote end has the second via field present
in it. Even then i'm getting the same error.
One more thing I've observed in the code that the value
of 2nd via is being checked at two places. One in receive.c and another
is forward.c.
The check in receive.c is passed but the same check got
failed at one stage later (forward.c).
regds,
----- Forwarded by Parminder
Nayyar/RCOM/RelianceADA on 08/07/2007 03:16 PM -----
"Weiter Leiter"
<bp4mls@googlemail.com> Sent by: serusers-bounces@lists.iptel.org
In case you're using SER as a proxy, when it receives
a request from upstream the message must contain already a Via; as it forwards
the request downstream, it adds another Via/Via body, pointing to itself.
When the reply comes from downstream, it must, thus, contain at least 2
Vias. Otherwise, the error is printed (and could indicate a broken/misconfigured
downstream element).
hi all,
Currently i was trying to test SER under load conditions. At the load of
just 10 simultaneous calls, the following error occured.
"ERROR: forward_reply: no 2nd via found in reply"
Note: Sometimes the error occured after 100-110 call and sometime it goes
upto 1000 calls..
--
"C is a language that combines all the elegance and power of assembly
language with all the readability and maintainability of assembly language."
_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers