Hello,
this only possible with a B2BUA, but SER is no B2BUA. Short explanation: for authentication the number in the CSeq header has to be increased, so the final reply for the authenticated request would not match with the original request from the UA any more.
Greetings Nils Ohlmeier
On Tuesday 17 August 2004 15:59, Dietmar Wessel wrote:
Hello,
after reading some documents on iptel, googling and going through the mailing list I still do not know how to set up the following configuration - or if such a configuration is possible with SER at all:
+---------+ +-----+ +-------+
|sip-phone|----| SER |----|sipgate|--PSTN...
+---------+ +-----+ +-------+ (...) I have some sip-phones which should register at "my" SER (this is the easy part). I also have an account at sipgate (and other GW-providers) which I would like to use for incoming and outgoing calls.
How can I configure my SER so that it REGISTERs at sipgate, so that sipgate will send INVITEs to my SER when there is an incoming call?
How can I configure SER so that is authenticates against sipgate when setting up an ougoing call?
The final setup should allow me to make "internal" calls between the sip-phones, receive incoming calls from some "public" GW-providers and use "least-cost-routing" for external calls (use cheapest GW depending on destination). I believe that such a configuration is not that exotic, but I could not find a usable sample...
Thank you
Dietmar Wessel
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers