11 Jun
2008
11 Jun
'08
2:55 p.m.
I was thinking it should generate 9 records so it'll show up as 3 different
calls so we can show CDR properly in web interface as well as calculate
billing for users as the user who forwarded the call should be charged for
the call. Also if we get INVITE only then we may not get accurate duration
of call as actual duration starts when callee accepts the call and ACK is
received. Is this scenario wrong?
On Wed, Jun 11, 2008 at 5:19 PM, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro>
wrote:
Perfect !
regarding multi-leg calls - first of all, there is no need to enabled in
for ACK and BYEs - make no sense. usually you want to see all the legs of
the call for INVITE.
Now, about how many records you get - depends on how many AVPs (used of
multi-leg acc) you set from the script. If you 3 INVITEs, means you add 3
values for at least of the AVPs .
Regards,
Bogdan
Ruchir wrote:
I had put setflag after t_newtran() previously.
Now I moved it before
t_newtran() and got records for INVITE, ACK & BYE for normal call perfectly.
:)
Then I tested for call forwarding scenario. In this case forwarding is set
as below:
90004 -> 90001 -> 90003.
I called 90004 from 90002 and I got 7 records in acc table. 3 INVITEs, 3
BYEs and only single ACK. Shouldn't it log 3 ACK messages?
On Wed, Jun 11, 2008 at 4:32 PM, Bogdan-Andrei Iancu <
bogdan(a)voice-system.ro <mailto:bogdan@voice-system.ro>> wrote:
Be sure you set the accounting flag before any t_relay() or
t_newtran() for the INVITE. To be sure, try to use log/xlog to put
some debugs in your script and check if the flag is really set
before t_relay().
Regards,
Bogdan
Ruchir Lists wrote:
I configured simple acc module to store records in acc table,
set proper flags. Then tried to call number directly(not with
forwarding) but still I get only BYE record. Any suggestion?
On Wed, Jun 11, 2008 at 2:43 PM, Bogdan-Andrei Iancu
<bogdan(a)voice-system.ro <mailto:bogdan@voice-system.ro>
<mailto:bogdan@voice-system.ro
<mailto:bogdan@voice-system.ro>>> wrote:
Hi Ruchir,
There are two aspects here:
1) making acc to work - setting the flags and getting the ACC
records
2) enabling multi-leg account and putting more info into the
accounted info
First you should to solve (1) - just getting a simple ACC
record
for INVITEs and BYEs (no multi leg accounting) - it this
working
for you or you get only BYE acc?
Regards,
Bogdan
Ruchir Lists wrote:
Hi All,
I'm trying to configure OpenSER with multi-leg
accounting. I'm
using OpenSER 1.2 & radius. I'm using acc_radius table for
writing cdr records. I've searched through several articles
and mailing list posts about configuring multi-leg
accounting
and everywhere they talk about setting up multi-leg-info
parameter of acc module to configure leg source &
destination
and setting up accounting flag. But this is not working for
me. I get only BYE record in table if I use this way to
write
multiple records for one call in call forwarding
scenario. I
managed to get multiple records by calling
acc_rad_request on
INVITE, ACK, BYE & CANCEL. For instance, I have 4 users;
90001, 90002, 90003, 90004. The call forwarding is
setup as below:
90004 -> 90001 -> 90003.
I dial 90004 from 90002 user and it forwards the call
to 90001
& then 90003 and they're connected properlry. However I
don't
get leg source/destination properly and also I get 7-8 bye
records for this call. Can anyone guide me in right
direction
if I'm doing anything wrong.
Regards,
Ruchir
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.openser.org
<mailto:Users@lists.openser.org>
<mailto:Users@lists.openser.org <mailto:Users@lists.openser.org>>
http://lists.openser.org/cgi-bin/mailman/listinfo/users