13 Jul
2015
13 Jul
'15
10:01 a.m.
Hello,
what is the version are you using?
Just as side note, the received parameter is also required by the
presence of rport parameter in incoming request -- I know you referred
to the one in Contact, just wanted to underline the difference.
Cheers,
Daniel
On 09/07/15 16:22, Kristian Kielhofner wrote:
Hello,
I'm testing some basic flags with nat_uac_test. I have the following
(rudimentary) script:
route[NATDETECT] {
#!ifdef WITH_NAT
if (has_body("application/sdp")) {
if (nat_uac_test("18")) {
xlog("SCRIPT: SDP NAT Detected\n");
setflag(6);
}
} else {
if (nat_uac_test("2")) {
xlog("SCRIPT: Other NAT Detected\n");
setflag(6);
}
}
if (isflagset(6)) {
xlog("SCRIPT: NAT detected\n");
force_rport();
if (is_method("REGISTER")) {
fix_nated_register();
} else {
if(is_first_hop())
set_contact_alias();
}
setflag(FLT_NATS);
}
#!endif
return;
}
When presented with this REGISTER message (ngrep output, so first
line is IP source address and port):
U 192.168.113.17:6060 -> 192.168.113.11:5060
REGISTER sip:192.168.113.11;transport=udp SIP/2.0.
Via: SIP/2.0/UDP 192.168.113.17:6060;branch=z9hG4bKOzvuzaIa;rport.
From: <sip:user_1@192.168.113.11>;tag=3F785909-559E7E9F0009321B-B5BFFB40.
To: <sip:user_1@192.168.113.11>.
CSeq: 10 REGISTER.
Call-ID: 1C193C6B-559E7E9F00093255-B5BFFB40.
Max-Forwards: 70.
User-Agent: FreeSWITCH.
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE,
REGISTER, REFER, NOTIFY.
Supported: timer, path, replaces.
Contact: <sip:gw+sip0@10.40.47.190:5080;transport=udp;gw=sip0>;expires=3600.
Content-Length: 0.
.
U 192.168.113.11:5060 -> 192.168.113.17:6060
SIP/2.0 200 OK.
Via: SIP/2.0/UDP
192.168.113.17:6060;branch=z9hG4bKOzvuzaIa;rport=6060;received=192.168.113.17.
From: <sip:user_1@192.168.113.11>;tag=3F785909-559E7E9F0009321B-B5BFFB40.
To: <sip:user_1@192.168.113.11>;tag=b27e1a1d33761e85846fc98f5f3a7e58.1045.
CSeq: 10 REGISTER.
Call-ID: 1C193C6B-559E7E9F00093255-B5BFFB40.
Contact:
<sip:gw+sip0@10.40.47.190:5080;transport=udp;gw=sip0>;expires=3600;received="sip:192.168.113.17:6060".
Server: Kamailio.
Content-Length: 0.
.
Log output:
Jul 9 10:00:41 kamailio /usr/sbin/kamailio[3886]: ERROR: <script>:
SCRIPT: Other NAT Detected
Jul 9 10:00:41 kamailio /usr/sbin/kamailio[3886]: ERROR: <script>:
SCRIPT: NAT detected
Log output, the presence of the added "received" parameter in the
returned Contact, etc show that NAT was detected. However, the IP
source and port match the one presented in the Via header.
What am I missing here?
Thanks!
--
Daniel-Constantin Mierla
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Book: SIP Routing With Kamailio - http://www.asipto.com