Re: [SR-Users] Kamailio 3.0.4 is crashed

Hi Daniel, Thanks Daniel for your answer. It's very helpful for me :). Actually i tried with using kamailio 3.1.4 (lastest kamailio) but i got the problem with auth module and parameter with auth module. Because some parameters at auth module have changed. http://kamailio.org/docs/modules/stable/modules/auth.html [3.1.4] But in 3.0.4 kamailio, i am using auth module with these parameter and it had error with new kamailio (3.1.4) . :( kamailio.cfg ######################################################## loadmodule auth.so # ----- auth params ----- modparam("auth", "username_spec", "$var(username)") modparam("auth", "password_spec", "$var(password)") modparam("auth", "calculate_ha1", 1) route[AUTH] { $var(utype) = 0; #!ifdef WITH_AUTH if (is_method("REGISTER")) { if(is_present_hf("Authorization")) { # authenticate the REGISTER requests (uncomment to enable auth) if(!route(GETPASSWD)) { www_challenge("", "0"); exit; } if(!pv_www_authorize("")) { www_challenge(""/*realm*/,"0"/*qop*/); exit; } } else { www_challenge("", "0"); exit; } } else { $var(srcgrp) = allow_source_address_group(); if ($var(srcgrp) > 0) { # src ip allowed $var(utype) = 1; if($var(srcgrp)!=100) { $rd = $Ri; $fs = "udp:" + $Ri + ":5062"; } return 1; } # authenticate if from local subscriber (uncomment to enable auth) if (from_uri==myself) { if(is_present_hf("Proxy-Authorization")) { # authenticate the non-REGISTER requests (uncomment to enable auth) if(!route(GETPASSWD)) { proxy_challenge("", "0"); exit; } if(!pv_proxy_authorize("")) { proxy_challenge(""/*realm*/,"0"/*qop*/); exit; } } else { proxy_challenge("", "0"); exit; } $var(utype) = 2; consume_credentials(); # caller authenticated } } #!endif return; } ##################################################### Error logs: Sep 6 19:37:01 CorePBX kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex: parameter <username_spec> not found in module <auth> Sep 6 19:37:01 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 260, column 51: Can't set module parameter Sep 6 19:37:01 CorePBX kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex: parameter <password_spec> not found in module <auth> Sep 6 19:37:01 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 261, column 51: Can't set module parameter Sep 6 19:37:01 CorePBX kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex: parameter <calculate_ha1> not found in module <auth> Sep 6 19:37:01 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 262, column 36: Can't set module parameter Sep 6 19:37:01 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 562, column 27: unknown command, missing loadmodule? Sep 6 19:37:01 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 594, column 30: unknown command, missing loadmodule? Sep 6 19:37:39 CorePBX kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex: parameter <username_spec> not found in module <auth> Sep 6 19:37:39 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 260, column 51: Can't set module parameter Sep 6 19:37:39 CorePBX kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex: parameter <password_spec> not found in module <auth> Sep 6 19:37:39 CorePBX kamailio: : <core> [cfg.y:3419]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 261, column 51: Can't set module parameter Sep 6 19:37:39 CorePBX kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex: parameter <calculate_ha1> not found in module <auth> ######################################################## I appreciate all your help on this case. Thanks Daniel, KhoaNVP On Sat, Sep 10, 2011 at 1:58 PM, Daniel-Constantin Mierla &lt;miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote: Hello, it seems like a buffer overflow happened previously, since the crash is in malloc. Do you get any error messages is syslog? Can you recompile with QM_DBG_MALLOC like explained in the next link and try again watching the syslog messages? http://www.kamailio.org/dokuwiki/doku.php/troubleshooting:memory On another hand, 3.0.4 is quite old, why are not using 3.1.4, it is far more updated than 3.0 series -- we are just to release first in 3.2 series. Upgrading from 3.0 to 3.1 is rather trivial. Cheers, Daniel On 9/9/11 8:38 PM, KhoaNVP wrote: Hi everyone, I hope you can help me with this issues. I'm working with kamailio 3.0.4 and when i implement the call via kamailio after 1-->3 mins , kamailio is crashed. It's my debug from core log. Core was generated by `kamailio -E -ddd'. Program terminated with signal 11, Segmentation fault. #0 fm_malloc (qm=0x88c860, size=<value optimized out>) at mem/f_malloc.c:382 382 *f=frag->u.nxt_free; (gdb) qt Undefined command: "qt". Try "help". (gdb) bt #0 fm_malloc (qm=0x88c860, size=<value optimized out>) at mem/f_malloc.c:382 #1 0x000000000041fd27 in dup_lump_list_r (l=0x9275f8, dir=LD_AFTER, error=0x7fff23bd661c) at data_lump.c:453 #2 0x000000000041ffa9 in dup_lump_list_r (l=0x927640, dir=LD_AFTER, error=0x7fff23bd666c) at data_lump.c:476 #3 0x000000000041ff6d in dup_lump_list_r (l=0x926db0, dir=<value optimized out>, error=0x7fff23bd66b4) at data_lump.c:465 #4 0x0000000000420058 in dup_lump_list (l=0x88c860) at data_lump.c:508 #5 0x00002b8b2efb858d in prepare_new_uac (t=0x2b8b3218ffa8, i_req=0x926ef0, branch=0, uri=0x927150, path=0x9274d0, next_hop=<value optimized out>, fsocket=0x0, snd_flags=0 '\000', fproto=0, flags=0) at t_fwd.c:242 #6 0x00002b8b2efb94c7 in add_uac (t=0x2b8b3218ffa8, request=0x926ef0, uri=0x927150, next_hop=0x7, path=0x9274d0, proxy=0x0, fsocket=0x0, snd_flags=0 '\000', proto=0, flags=0) at t_fwd.c:679 #7 0x00002b8b2efbce7a in t_forward_nonack (t=0x2b8b3218ffa8, p_msg=0x926ef0, proxy=0x0, proto=0) at t_fwd.c:1340 #8 0x00002b8b2efb4996 in t_relay_to (p_msg=0x926ef0, proxy=0x0, proto=0, replicate=0) at t_funcs.c:358 #9 0x0000000000413489 in do_action (h=0x7fff23bd71e0, a=0x8be788, msg=0x926ef0) at action.c:860 #10 0x0000000000415e03 in run_actions (h=0x7fff23bd71e0, a=0x8be788, msg=0x926ef0) at action.c:1315 #11 0x00000000004161e7 in run_actions_safe (h=0x7fff23bd8bb0, a=0x38, msg=0x88ca08) at action.c:1370 #12 0x000000000049696b in rval_get_int (h=0x7fff23bd8bb0, msg=0x88ca08, i=0x7fff23bd75dc, rv=0x7, cache=0x7) at rvalue.c:897 #13 0x000000000049b7fc in rval_expr_eval_int (h=0x7fff23bd8bb0, msg=0x926ef0, res=0x7fff23bd75dc, rve=0x8be878) at rvalue.c:1841 #14 0x000000000049b8ad in rval_expr_eval_int (h=0x7fff23bd8bb0, msg=0x926ef0, res=0x7fff23bd79d8, rve=0x8bef48) at rvalue.c:1848 #15 0x0000000000411d49 in do_action (h=0x7fff23bd8bb0, a=0x8bf798, msg=0x926ef0) at action.c:834 #16 0x0000000000415e03 in run_actions (h=0x7fff23bd8bb0, a=0x8be608, msg=0x926ef0) at action.c:1315 #17 0x0000000000413084 in do_action (h=0x7fff23bd8bb0, a=0x8f6060, msg=0x926ef0) at action.c:479 #18 0x0000000000415e03 in run_actions (h=0x7fff23bd8bb0, a=0x8f6060, msg=0x926ef0) at action.c:1315 #19 0x0000000000411dab in do_action (h=0x7fff23bd8bb0, a=0x8f62d0, msg=0x926ef0) at action.c:853 #20 0x0000000000415e03 in run_actions (h=0x7fff23bd8bb0, a=0x8f62d0, msg=0x926ef0) at action.c:1315 #21 0x0000000000413084 in do_action (h=0x7fff23bd8bb0, a=0x8bd698, msg=0x926ef0) at action.c:479 #22 0x0000000000415e03 in run_actions (h=0x7fff23bd8bb0, a=0x8bd398, msg=0x926ef0) at action.c:1315 #23 0x0000000000411dab in do_action (h=0x7fff23bd8bb0, a=0x8bd788, msg=0x926ef0) at action.c:853 #24 0x0000000000415e03 in run_actions (h=0x7fff23bd8bb0, a=0x8a1340, msg=0x926ef0) at action.c:1315 #25 0x0000000000416174 in run_top_route (a=0x8a1340, msg=0x926ef0, c=<value optimized out>) at action.c:1391 #26 0x000000000048009c in receive_msg (buf=0x57e779 "DEBUG", len=<value optimized out>, rcv_info=0x7fff23bd8e20) at receive.c:196 #27 0x000000000050698b in udp_rcv_loop () at udp_server.c:520 #28 0x0000000000455e2f in main_loop () at main.c:1447 #29 0x0000000000456f32 in main (argc=<value optimized out>, argv=0x7fff23bd90e8) at main.c:2251 (gdb) Thanks with all the help, Khoa -- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda