7 Apr
2005
7 Apr
'05
8:22 a.m.
First of all, always CC serusers. Other users may have (or may get) the
same problems.
libmysqlclient is most likely your problem. Version 10 is ,mysql 3.23, while
version 14 is 4.x. The libraries are quite different and a crash is only
natural. You need to install either the 3.23 version of mysql OR the 3.x
compatibility libraries for version 4.x. You will find them at
http://dev.mysql.com/ or maybe throug hyour distribution.
g-)
Damian Bundred wrote:
Hi,
you seem to know alot about SER, and i was wondering if you could
help, and point out anywhere that i've gone wrong, or made false
assumptions. I have an SER server set up at 192.168.0.6 with a mysql
database running on it. i set my domain to 192.168.0.6, and ran the
database setup script, and it seemed to work fine. i then ran the
very basic SER config file, and the phone connected to it fine.
i then took the comments i was told to out, and it would run, but
whenever the phone connected, SER would quit.
i've narrowed the problem down to auth_db. when i leave the comment to
initiate that module in, the system works fine, but when i remove the
comment, the system dies very shortly after a device tries to connect
saying that the core is not generated.
I've enclosed the 2 seperates "SER -E" files out.txt without auth_db,
and out2.txt with auth_db.
I used the binaries from the website, rather than compiling my own,
thats unlikely to have anything to do with it is it?
Also, when i installed mysql, it didnt not have libmysqlclient.10.so
only .14.so, so i ln'ed .10 into .14 as i'd seen done with .10 into a
.12, was this correct?
I would really appreciate your help, its been driving me insane for a
day now.
Many thanks,
Damian Bundred.