21 Mar
2007
21 Mar
'07
9:34 p.m.
Hello,
On 03/21/07 20:14, Sergio Gutierrez wrote:
Hi Daniel.
I am repeating the test using 6 instances of SIPp, and I am having a
better performance.
A question. In the page you have listed that the Proxy and UAS runs on
a 64 bit machine. Was the compilation done to generate a 64 bit
executable?
yes, it was 64bit executable. OS is Debian amd64.
Cheers,
Daniel
Thanks.
Kind regards.
Sergio Gutierrez
On 3/21/07, *Sergio Gutierrez* <saguti(a)gmail.com
<mailto:saguti@gmail.com>> wrote:
Hi Daniel.
Thanks for your answer.
My configs are as the same used in published tests, and my UAS, as
described is another instance of Openser.
I will try what you sugest.
Thanks.
Sergio Gutiérrez.
On 3/21/07, *Daniel-Constantin Mierla* < daniel(a)voice-system.ro
<mailto:daniel@voice-system.ro>> wrote:
Hello,
do you use same configs as in published tests? The UAS is another
openser with just sending a 200 ok reply or sipp with uas
scenario?
First check what is the capacity of sipp -- make a very simple
config
with just sl_send_reply("200","ok") in main route and start
sipp. See
what results you get and that should be the reference for sipp
capacity.
Also, try to use multiple instances of sipp, from different
servers, see
if you get the cumulative value better.
The tests were done on Core2 processor, and parallel execution of
openser processes has some impact as well.
Cheers,
Daniel
On 03/21/07 16:52, Sergio Gutierrez wrote:
Hi.
Currently I am installing Openser 1.2.0 on a Sun Fire T2000
running
Solaris 10.
Although I used an optimized version of GCC for SPARC
Systems, and
used the recommended settings to generate
accurate code for my
Processor (UltraSPARC T1), the results of the performance
tests are
just 50% of the presented ones on the web page.
My setup is the following:
Proxy and UAS: Sun Fire T2000, 8 GB RAM, 1 UltraSPARC T1 1.2
GHZ 6 Core.
UAC's: Two domain of a Sun Fire 12K, 4 GB
RAM, 4 UlraSPARC
III+ 900 Mhz
Software versions listed as on the webpage.
openser -V output:
version: openser 1.2.0-notls (sparc/solaris)
flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
FAST_LOCK-ADAPTIVE_WAIT-NOSMP
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE
262144,
MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535
poll method support: poll, select, /dev/poll.
svnrevision: unknown
@(#) $Id: main.c 1827 2007-03-12 15:22:53Z bogdan_iancu $
main.c compiled on 21:43:51 Mar 19 2007 with gcc 4.0.3
I would thank any idea about how could I improve the
performnace of my
setup. I think that because of the hardware
specifications,
the result
should be at least equal than listed.
Thanks in advance.
Kind regards.
Sergio Gutiérrez.
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users