Re: [SR-Users] Outbound and Registrar. No binding update

Yes, Verified, 'gruu_enabled' is set to one. Regards 2012/7/27 Daniel-Constantin Mierla &lt;miconda(a)gmail.com <mailto:miconda@gmail.com>> Hello, just to be sure before going to any further investigation (as I remember, such case I tested a bit with some command line tools due to lack of a sip phone with good ob/gruu support), do you have in the config: modparam("registrar", "gruu_enabled", 1) The default config file in 3.3, has the parameter set to 0. Cheers, Daniel On 7/27/12 10:05 AM, Iñaki Baz Castillo wrote: Hi, full agree with this bug report. Adding the devel maillist. More comments at the end of the mail: 2012/7/26 José Luis Millán &lt;jmillan(a)aliax.net <mailto:jmillan@aliax.net>>: Hi, I'm using Kamilio 3.3.0 as registrar server. I`m using an outbound proxy so 'use_path' parameter or 'registrar' module is enabled. According to RFC 5626, a re-registration from a specific combination of AoR, instance_id and reg_id must update the binding. "" If the registrar receives a re-registration for a specific combination of AOR, and instance-id and reg-id values, the registrar MUST update any information that uniquely identifies the network flow over which the request arrived if that information has changed, and SHOULD update the time the binding was last updated. "" In my installation this is not fullfilled as shown: "" AOR:: jmillan Contact:: sip:jmillan@MY_IP;transport=ws;ov-ob=a570655c14 Q= Expires:: 181 Callid:: 1hgq3khalq2rzfr Cseq:: 108 User-agent:: JsSIP 0.1.0 Path:: <sip:OUTBOUND_IP:9090;transport=tcp;lr;ovid=de0c0b9f>,<sip:a570655c14@OUTBOUND_IP:10080;transport=ws;lr;ovid=de0c0b9f;ob> State:: CS_SYNC Flags:: 0 Cflag:: 0 Socket:: tcp:KAM_IP:5060 Methods:: 783 Ruid:: uloc-50119d99-328e-1 Instance:: <urn:uuid:38dce009-ae1f-4fd1-91dc-99ed9affddc1> Reg-Id:: 1 Contact:: sip:jmillan@MY_IP;transport=ws;ov-ob=1dd97b4d51 Q= Expires:: 193 Callid:: 1hgq3khalq2rzfr Cseq:: 110 User-agent:: JsSIP 0.1.0 Path:: <sip:OUTBOUND_IP:9090;transport=tcp;lr;ovid=de0c0b9f>,<sip:1dd97b4d51@OUTBOUND_IP:10080;transport=ws;lr;ovid=de0c0b9f;ob> State:: CS_SYNC Flags:: 0 Cflag:: 0 Socket:: tcp:KAM_IP:5060 Methods:: 783 Ruid:: uloc-50119d99-3290-2 Instance:: <urn:uuid:38dce009-ae1f-4fd1-91dc-99ed9affddc1> Reg-Id:: 1 "" The scenario is such that when the client looses the connection with the Outbound Server, it reconnects and re-registers to Kamailio in order to replace registration and be able to receive in-dialog messages. Receiving in-dialog requests should work since GRUU is also being used. The problem is that the new REGISTER (after UA disconnection) does not update the previous one (as this thread reports) so Kamailio still chooses the previous binding which does not work anymore. Regards. -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - http://asipto.com/u/katu Kamailio Practical Workshop, Netherlands, Sep 10-12, 2012 - http://asipto.com/u/kpw _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users