Re: [OpenSER-Users] Re: can't get code for the src-leg attribute

Hi Norman, Thanks for the reply. According to your suggestion, I have added the following lines in

ATTRIBUTE Src-Leg 1075 integer ATTRIBUTE Dst-Leg 1076 integer change in radiusclient-ng/dictionary: ATTRIBUTE Src-Leg 1075 integer ATTRIBUTE Dst-Leg 1076 integer change in openser/openser.cfg: #modparam("acc", "multi_leg_info",

modparam("acc", "multi_leg_info",

Note, I have commented out the original src_leg/dst_leg definition. I don't know what is that i:901 and i:902 means, so I simply change

case and change "_" to "-". Restarted radiusd, and try to start openser then found the following

/var/log/messages file: ERROR:acc:extra2int: <Src-Leg> is not a number When I started radiusd, there are info messages written to

Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file.

soon. Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output

output=none? Wed Oct 3 09:28:45 2007 : Info: Ready to process requests. Thanks Sam ----- Original Message ----

To: Live Great &lt;livegreat007(a)yahoo.com&gt; Cc: users(a)openser.org Sent: Wednesday, October 3, 2007 3:26:40 AM Subject: Re: can't get code for the Failed attribute Hi Sam, If you altered the dictionary entries, you MUST make sure that your openser.cfg, has also been updated. For example: modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg); Dst-Leg=$avp(s:destination_leg)") Note that Src-Leg and Dst-Leg MUST be in the dictionary for BOTH radiusclient-ng AND radiusd. Regards, Norm Live Great wrote: > Hi, > > In your example, do you meant openser will trainsform Src-Leg to > src_leg and Dst-Leg to dst_leg? > After I followed your suggestion and changed the definition to, > ATTRIBUTE Src-Leg 1075 string > ATTRIBUTE Dst-Leg 1076 string > > I get an error: > ERROR: acc: can't get code for the src_leg attribute > > I have a feeling that it is case sensitive, and openser is looking for > src_leg instead Src-Leg. > > Thanks > Sam. > > > ----- Original Message ---- >

> To: Live Great &lt;livegreat007(a)yahoo.com&gt; > Cc: users(a)openser.org > Sent: Tuesday, October 2, 2007 9:42:15 PM > Subject: Re: can't get code for the Failed attribute > > Hello Sam, > > The definition you used: > > ATTRIBUTE src_leg 0 string > > Probably isn't valid because "0" is more than likely already being > used. Notice that the various ATTRIBUTE numbers are all unique and just > increment. So use the next higher number that is available. If the > last ATTRIBUTE was 240 then your definition might look like: > > ATTRIBUTE src_leg 241 string > > You might also want to consider the general naming convention that is > used. The above example would then look as follows: > > ATTRIBUTE Src-Leg 241 string > Note, when you get around to inserting this data into a database, the > column name will probably not be allowed to have a dash (unless the > column name is quoted). > > Regards, > Norm > > > Live Great wrote: > > It looks like it doesn't look up the dictionary files in > > /usr/local/share/freeradius/ directory. > > But src_leg and dst_leg are not defined in the share directory. > > > > Sam. > > > > > > ----- Original Message ---- > >

> > To: Norman Brandinger &lt;norm(a)goes.com&gt; > > Cc: users(a)openser.org > > Sent: Tuesday, October 2, 2007 10:17:47 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Norman, > > > > Thank you for the reply. > > With the definition of "ATTRIBUTE src_leg 0 string", I got an error > > "src_leg is not a number". > > After changed it to the following definition, > > ATTRIBUTE Acct-Status-Type 40 integer > > ATTRIBUTE Service-Type 6 integer > > ATTRIBUTE Event-Timestamp 55 integer > > ATTRIBUTE Acct-Session-Id 44 string > > ATTRIBUTE src_leg 1 integer > > ATTRIBUTE dst_leg 1 integer > > VALUE Acct-Status-Type Start 1 > > VALUE Acct-Status-Type Stop 2 > > VALUE Acct-Status-Type Failed 0 > > VALUE Service-Type Sip-Session 15 > > > > I still got this error: > > ERROR:acc:extra2int: <src_leg> is not a number > > > > Thanks > > Sam > > ----- Original Message ---- > >

> > To: Live Great &lt;livegreat007(a)yahoo.com&gt; > > Cc: users(a)openser.org > > Sent: Tuesday, October 2, 2007 9:43:41 AM > > Subject: Re: can't get code for the Failed attribute > > > > Hi Sam, > > > > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the > > following entry: > > > > VALUE Acct-Status-Type Failed 15 > > > > I'm not an expert in this area, but it appears that "Failed" is

> > predefined. You probably should NOT use "Failed", instead create a > > unique attribute such as "failed-reason". This is of course assuming > > the rest of your definitions are good. > > > > Please do not cross-post configuration questions of this type to the > > developers mailing list. > > > > Regards, > > Norm > > > > > > Live Great wrote: > > > Hi, > > > > > > After added the following Attributes in the

> > > file: > > > ATTRIBUTE src_leg 0 string > > > ATTRIBUTE dst_leg 0 string > > > ATTRIBUTE Failed 0 string > > > > > > I got the following error: > > > ERROR: acc: can't get code for the Failed attribute value > > > > > > How to define a proper attribute in the dictionary file? > > > Thanks > > > Sam > > > > > > ----- Original Message ---- > > >

> > > To: Live Great &lt;livegreat007(a)yahoo.com&gt; > > > Cc: devel(a)openser.org > > > Sent: Monday, October 1, 2007 9:01:54 PM > > > Subject: Re: [OpenSER-Devel] can't get code for the

> > > attribute > > > > > > Good Morning, > > > > > > You need to make sure the dictionary settings are correct and

> > > match what you have specified in OpenSER. > > > > > > The dictionaries are specified in radiusclient-ng and in radiusd

> > > mediaproxy if you use it) > > > > > > The error is telling you that "Sip-Response-Code" cannot be found > in any > > > of the dictionaries you have specified. > > > > > > Regards, > > > Norm > > > > > > Live Great wrote: > > > > Hi, > > > > > > > > I still can't this work, that's why I posted in the development > forum. > > > > > > > > I have installed openser with *_ACC=ture uncommented in the > > acc/Makfile.. > > > > But I can't start openser now. > > > > Here is the error when I executed /usr/local/etc/rc.d/openser

> > > > > > > > core:rc.d # ./openser start > > > > Command Monit to start OpenSER... > > > > 'openser' start: /usr/local/etc/rc.d/openser > > > > 'openser' failed to start > > > > Starting Open SIP Router: > > > > Listening on > > > > udp: 127.0.0.1 [127.0.0.1]:5060 > > > > udp: 12x..x.x..x [12x.x.x.x]:5060 > > > > Aliases: > > > > udp: xxx..xxx..com.au:5060 > > > > udp: localhost.xxx.com.au:5060 > > > > udp: localhost:5060 > > > > > > > > In /var/log/messages: > > > > ERROR: acc: can't get code for the Sip-Response-Code attribute > > > > ERROR:acc:mod_init: failed to init radius > > > > > > > > core:rc.d # ps -auxww | grep openser > > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep > > > openser > > > > core:rc.d # ps -auxww | grep radius > > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00 > > > > /usr/local/sbin/radiusd > > > > core:rc.d # ps -auxww | grep mysql > > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02 > /bin/sh > > > > /usr/local/bin/mysqld_safe > > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql > > > > --datadir=/usr/local/var/db/mysql > > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid > > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77 > [mysqld] > > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep > > mysql > > > > > > > > Why I got thos acc errors when starting openser? > > > > > > > > Thanks > > > > SW > > > > > > > > > > > > > > > > ----- Original Message ---- > > > >

> > > > To: Live Great &lt;livegreat007(a)yahoo.com&gt; > > > > Cc: FreeRadius users mailing list > > > > &lt;freeradius-users(a)lists.freeradius.org&gt;rg>; users(a)openser.org > > > > Sent: Friday, September 28, 2007 11:11:23 PM > > > > Subject: Re: [OpenSER-Users] Failed to compile openser with > freeradius > > > > support > > > > > > > > Comment the FREERADIUS=1 in the openser/Makefile > > > > > > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true

> > > > commented > > > > > > > > Regards, > > > > Norm > > > > > > > > > > > > Live Great wrote: > > > > > HI, > > > > > > > > > > In FreeBSD 6.2, I got this error when I compiled openser with > > > > > freeradius support. > > > > > > > > > > ../../radius.h:36:32: freeradius-client.h: No such file or > directory > > > > > acc.c: In function `init_acc_rad': > > > > > acc.c:464: warning: assignment makes pointer from integer

> > > a cast > > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this > > function) > > > > > acc.c:475: error: (Each undeclared identifier is reported only > once > > > > > acc.c:475: error: for each function it appears in.) > > > > > acc.c:475: error: `da' undeclared (first use in this function) > > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this > > function) > > > > > acc.c:475: error: `dv' undeclared (first use in this function) > > > > > acc.c: In function `acc_rad_request': > > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this > > function) > > > > > acc.c:514: error: invalid lvalue in assignment > > > > > acc.c:555: error: `OK_RC' undeclared (first use in this

> > > > > gmake[1]: *** [acc.o] Error 1 > > > > > gmake[1]: Leaving directory > > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc' > > > > > gmake: *** [modules] Error 2 > > > > > *** Error code 2 > > > > > > > > > > Stop in /usr/ports/net/openser. > > > > > *** Error code 1 > > > > > > > > > > Is there any way I can compile openser with freeradius support? > > > > > > > > > > Thanks > > > > > SW > > > > > > > > >

> > > > > > > > > >