2 Oct
2003
2 Oct
'03
11:53 a.m.
Ser doesn't appear to be passing the Caller-id to the ata at auth or I
am doing something wrong. Can anyone point me in the right direction?
Thanks,
Stephen
I have the following entry in my freeradius users file.
test(a)voip2.test.net Auth-Type := Digest, User-Password == "test"
Reply-Message = "Hello, test with digest", Sip-Rpid =
"8472222222"
When I run a radclient test I get the correct info..
radclient -f digest.test 219.242.10.153:1812 auth testing
Received response ID 134, code 2, length = 57
Reply-Message = "Hello, test with digest"
Sip-Rpid = "8472222222"
This is the output from ngrep port 5060
U 216.222.234.113:5060 -> 219.242.10.153:5060
REGISTER sip:voip2.test.net SIP/2.0..Via: SIP/2.0/UDP
216.222.234.113:5060..
From: sip:test@voip2.test.net;tag=277486986..To:
sip:test@voip2.test.net..Cal
l-ID: 2687235586@216.222.234.113..CSeq: 2 REGISTER..Contact:
<sip:test@216.
222.234.113:5060;transport=udp>;expires=120..User-Agent: Cisco ATA 186
v2.
16.2 ata18x (030909a)..Authorization: Digest
username="test",realm="voip2.test.net",nonce="3f7c49b40e81572eff05bdf50c
867a85bbb0da3c",uri="sip:voip2.test
.net",response="1684410c130d6faa9a3c573365f36ab6"..Content-Length:
0....
#
U 219.242.10.153:5060 -> 216.222.234.113:5060
SIP/2.0 200 OK..Via: SIP/2.0/UDP
216.222.234.113:5060;rport=5060..From: sip
:test@voip2.test.net;tag=277486986..To:
sip:test@voip2.test.net;tag=b27e1a1d3
3761e85846fc98f5f3a7e58.13c2..Call-ID:
2687235586@216.222.234.113..CSeq: 2
REGISTER..Contact:
<sip:test@216.222.234.113:5060;transport=udp>;q=0.00;exp
ires=120..Server: Sip EXpress router (0.8.12dev-t16
(i386/linux))..Content-
Length: 0..Warning: 392 219.242.10.153:5060 "Noisy feedback tells:
pid=121
59 req_src_ip=216.222.234.113 req_src_port=5060
in_uri=sip:voip2.test.net ou
t_uri=sip:voip2.test.net via_cnt==1"....