17 Jan
2006
17 Jan
'06
7:18 p.m.
Hello,
you have to use a nat traversal solution. If the clients are behind
symmetric nat, then you have to use server side components. OpenSER has
two server-side solutions for nat traversal:
- nathelper module + rtpproxy
- mediaproxy module + mediaproxy
If the clients are not behind a symmetric nat and they support STUN,
then you can let them to deal with nat traversal, you just need a stun
server (there are some public STUN servers available for use).
Cheers,
Daniel
On 01/17/06 17:08, Craig Mariner wrote:
Hi List
I have a problem with OpenSER. OpenSER has a public IP and is not
behind a NAT. Two clients that are behind a NAT ring each other but
there is no audio either way. Any advise please?
Sencond scenario two clients both behind the same NAT. .
Client1 calls the Client2, Client2 UA rings, Client2 answers the call
but it does not connect. Client1 call does not get answered by
Client2 and Client1 just hears the ringing tone. Any ideas?
Best Regards
--
Craig Mariner
Director
Wifi Specialist Ltd
www.wifispecialist.co.uk <http://www.wifispecialist.co.uk>
www.freewhy-fi.net <http://www.freewhy-fi.net> Building a Free Mesh
Network
Tel. 08703403427
email: wifibase(a)gmail.com <mailto:wifibase@gmail.com>
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users