I have the very same problem. I'd be keen to find out the solution!
----- Original Message -----
From: <iw03_amn(a)it.kth.se>
To: <serusers(a)lists.iptel.org>
Sent: Sunday, February 20, 2005 8:34 AM
Subject: [Serusers] SER, Rtpproxy, NAT.
Hi all,
I'm running ser 0.8.14 with nathelper+rtpproxy. I can initiate calls from
UA behind NAT to UA in public without problem. But, I can't initiate a
call from public to private even if the NATed client has been registered.
Please advise.
Here is the snippet of my ser.cfg
------------------------begin----------------------------------
#-----Nathelper parameters-----
modparam("registrar", "nat_flag", 6) # indicates that a registered
client
is behind NAT
modparam("nathelper", "natping_interval", 60) #ping interval 30s
modparam("nathelper", "ping_nated_only", 1) #ping only clients behind
NAT
.
.
if (nat_uac_test("3")) {
log(1, "src address different than via header->NAT
detected\n");
log(1, "force_rport and fix_nated_contact and
setflag(5)\n");
if (method=="REGISTER" || ! search("^Record-Route:"))
{
fix_nated_contact();# Rewrite contact with source
IP of signalling
if (method=="INVITE") {
fix_nated_sdp("1");# Add direction=active
to SDP
};
force_rport();# Add rport parameter to topmost Via
setflag(6);# Mark as NATed
};
append_hf("P-hint: fixed NAT contact for request\r\n");
};
.
.
route[1]
{
# !! Nathelper
if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" &&
!search("^Route:")){
sl_send_reply("479", "We don't forward to private IP
addresses");
break;
};
# if client or server know to be behind a NAT, enable relay
if (isflagset(6)) {
force_rtp_proxy();
};
# NAT processing of replies; apply to all transactions (for example,
# re-INVITEs from public to private UA are hard to identify as
# NATed at the moment of request processing); look at replies
t_on_reply("1");
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
# NATed transaction ?
onreply_route[1] {
if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
fix_nated_contact();
force_rtp_proxy();
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
----------------------------end----------------------------------------
Regards.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers