10 Dec
2020
10 Dec
'20
8:55 a.m.
Aatif Shaikh <aatif.shaikh(a)ecosmob.com>
Mon, Dec 7, 11:00 AM (3 days ago)
to sr-users
Hello All
I configure my kamailio.cfg to handle SLA using (SCA module) and shared
presence is working but still facing some issue in case of hold invite and
BYE and the reason behind of that issue is following error
Nov 26 07:38:40 SBC-4-1 /usr/local/sbin/kamailio[104107]: ERROR: sca
[sca_call_info.c:1008]: sca_call_info_invite_request_handler(): Failed to
update sip:4569@test.sip.abcd.com appearance-index 0 to active
actually, in Kamailio appearances, I can see the entry for this call but
the index is 1 instead of 0, and Kamailio going to update with a 0 index
[root@SBC-4-1 ntcarfte-kamailio]# kamcmd sca.all_appearances
sip:4569@test.sip.abcd.com 1 active 1606376289 sip:4569@10.xx.xx.xx
:5070;transport=udp sip:2003@test.sip.abcd.com
186161_mobile-rel120MTQ5OTcyZjFhMjMyNmI1ZGE1MWY4ODc2M2RkN2VmZmQ
45dc18d8 H6cS9vecZ248B
if I manually update appearances using RPC command with index 1 then the
phone started blinking as I change state to held
# kamcmd sca.update_appearance sip:4569@sc4test.sip.teledge.com 1 held
# kamcmd sca.all_appearances
sip:4569@test.sip.abcd.com 1 held 1606376516 sip:4569@10.xx.xx.xx
:5070;transport=udp sip:2003@test.sip.abcd.com
186161_mobile-rel120NzE5MDgyZDc1NjJiYjcwMWFlYmI3NzM3NjE2OTRhZjU
08f005cb eK9ratm83g92e
kamailio.cfg
route[SCA] {
if(is_method("SUBSCRIBE")) {
if ($hdr(Event) == "call-info" || $hdr(Event) ==
"line-seize") {
xlog("L_INFO","(MAIN) :HELLO ($avp(uuid)) : $avp(rsi) $sp
$hdr(Event)");
xdbg("SCA: $hdr(Event) SUBSCRIBE $ru from $si:$sp");
sca_handle_subscribe();
exit;
}
return;
}
if (!is_method("BYE|CANCEL|INVITE|PRACK|REFER")) {
return;
}
sca_call_info_update();
}
route[RELAY_OUTBOUND_FS] {
xlog("L_INFO","(RELAY_OUTBOUND_FS) : ($avp(uuid)) : INSIDE ROUTE
");
if (!has_totag()){
$avp(set_h) = 1;
}
t_on_reply("REPLY_OUTBOUND_FS");
route(SCA);
if (!t_relay()) {
sl_reply_error();
}
exit;
}
route[RELAY_INBOUND_FS] {
if(is_method("INVITE|BYE|UPDATE|CANCEL|ACK")) {
$avp(s:puburis_caller) = $fu;
setflag(8);
dlg_manage();
}
if(is_method("REGISTER")) {
t_on_reply("REPLY_REGISTER");
} else {
t_on_reply("REPLY_INBOUND_FS");
}
route(SCA);
if (!t_relay()) {
sl_reply_error();
}
exit;
}
onreply_route[REPLY_INBOUND_FS] {
xdbg("incoming reply\n");
if (status =~ "[456][0-9][0-9]") {
# don't update SCA state here, since there may be
# failure route processing (e.g., call forwarding).
# update state in failure route instead.
return;
}
route(SCA);
}
onreply_route[REPLY_OUTBOUND_FS] {
xdbg("incoming reply\n");
if (status =~ "[456][0-9][0-9]") {
# don't update SCA state here, since there may be
# failure route processing (e.g., call forwarding).
# update state in failure route instead.
return;
}
route(SCA);
}
can someone help me with this Did I missed something to handle SLA?