Dear Ludovic Zipp-Fuhrer,
Thank you very much!. They begin to work!
And now I can move on with acc.
In radiusclient.conf you have to set the bind parameters with the IP of your client. I got similar errors because I don't set this parameter correctly. I hope it helps you.
zhangshuai a écrit :
Dear Ludovic Zipp-Fuhrer,
What do you mean exactly? Whose configuration files? How to check it?
The number "DA61FC29" in the error message is the hexadecimal value of the ip address of radius server.
did you set the good bind addresses in the configuration files?
zhangshuai a écrit :
Hi all,
I wish to use softphone X-lite on SER and radius in db_mode. When I installed both freeradius 1.0.4 and radiusclient 0.4.3 on the same server which ser 0.8.14 has installed on, I could log in X-lite through radius authorization. And now I want radiusclient (on server A) to send the request to a remote radius server (on server B) to realize authorization. I have changed those config files: /usr/local/etc/radiusclient/servers, /usr/local/etc/radiusclient/radiusclient.conf and /usr/local/etc/raddb/clients.conf as the document (http://www.iptel.org/ser/doc/ser_radius/ser_radius.html#AEN193) did. Then I test the radius server as the above document said on server A: radclient -f digest server B auth testing123 and I received expected replied message from server B.
But when I log in x-lite, there are error messages:
Sep 29 17:11:06 localhost ser[4408]: rc_ip_hostname: couldn't look up host by addr: DA61FC29 Sep 29 17:11:06 localhost ser[4408]: rc_send_server: no reply from RADIUS server unknown:1812
How come? Did I mis-config anything?
Many thanks for your reply!
Shuai http://www.goldentek.biz
Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers
= = = = = = = = = = = = = = = = = = = =