SOLVED
Hi Phil:
Your below suggestion fixed this problem for us:
modparam("pua_dialoginfo", "override_lifetime", 14420) # Max call time (4 hours) plus a little
Pejman Rajabian
Director of Product Development
iTalk IP Networks LLC
Office: (703) 550-8888 x.107
Cell: (571) 723-2224
Fax: (703) 439-1350
pejman@italkip.com
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Phil Lavin
Sent: Friday, May 20, 2016 10:09 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Sequential calls messes up presence with pua-dialog info
You’re not going to have any of the patches I did – I believe they are all in 4.4. Though… now I look back at them, I’m not sure if any of them are relevant to your problem. The only one that might be relevant is https://github.com/kamailio/kamailio/pull/514 - specifically commit 1c0242f... Though I doubt it will help here.
Give the config I provided a try – that will probably solve your problems.
Phil Lavin
Telecoms Systems Manager
CloudCall by SYNETY
www.cloudcall.com
T: +44 (0) 330 335 0000 / +1 617 982 1600
D: +44 (0) 116 424 4790 / +1 716 242 6604
SM: LinkedIn
READ OUR BLOG FOR SMARTER COMMUNICATIONS
Confidentiality: This e-mail transmission, including any attachments, is intended only for the named recipient(s) and may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you have received this transmission in error, or are not the named recipient(s), please notify the sender immediately by return e-mail and permanently delete this transmission, including any attachments.
Security: This e-mail and any attachments are believed to be free from any virus but it is the responsibility of the recipient to ensure this is so. E-mail is not a 100% secure communication.
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Pejman Rajabian
Sent: 20 May 2016 13:07
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: Re: [SR-Users] Sequential calls messes up presence with pua-dialog info
Thanks for your response phil
Kamailio version 4.1.8
Sent from my iPhone
On May 20, 2016, at 3:17 AM, Phil Lavin <phil.lavin@synety.com> wrote:
Which version of Kamailio?
We had a tonne of issues with this module – many of which I submitted fixes for.
There were 2 issues that could not be resolved after a fair bit of trying:
· The presentity table was not cleared of the old state when a new state occurred (e.g. both trying and completed would be in the table for a single dialog). The fix for this was to set pua db_mode to 0
· The presentity table was sometimes cleared up too quickly when the dialog was still ongoing. The fix for this was to set the expiry time to a big number. In our case, the billing system won’t let calls go on for more than 4 hours so that value was chosen.
Here’s all the relevant settings:
# ----- presence params -----
modparam("presence", "db_url", DBURL)
modparam("presence", "db_update_period", 20)
modparam("presence", "clean_period", 60)
modparam("presence", "local_log_facility", "LOG_LOCAL3")
modparam("presence", "max_expires", 14430) # Max call time (4 hours) plus a little
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
# ----- pua params -----
modparam("pua", "db_url", DBURL)
modparam("pua", "db_mode", 0) # Memory only. Required due to the "multiple states for a single dialog" bug
modparam("pua", "update_period", 20)
modparam("pua", "outbound_proxy", MY_SIP_URL)
# ----- pua_dialoginfo params -----
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO)
modparam("pua_dialoginfo", "override_lifetime", 14420) # Max call time (4 hours) plus a little
modparam("pua_dialoginfo", "callee_trying", 1)
Phil Lavin
Telecoms Systems Manager
CloudCall by SYNETY
www.cloudcall.com
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Ali Pey
Sent: 19 May 2016 21:25
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: [SR-Users] Sequential calls messes up presence with pua-dialog info
Hello,
We are using pua-dialoginfo and presence modules for BLF.
When the first call comes in or goes out, every thing works great; however, a second call to the same key/extension (e.g a call waiting which is not answered) would turn off the key even though the original call/dialog is still active.
Has anyone had experienced such problem? How can I fix this?
Any constructive suggestion would be appreciated.
Regards,
Ali Pey
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users