Hello,
the config file seems to be correct, the problem is either in the configuration of radiusclient library or freeradius server.
Jan.
On 13-11 15:04, Madan wrote:
hi this is my ser.cfg which i m trying to use with freeradius..but it is nt working,,i.e i can not get my SIPUA registered to make a call ,and i m getting following log for ser
---ser log--
stateless - initializing Maxfwd module- initializing 0(13376) mod_init(): Database connection opened successfuly 0(0) INFO: udp_init: SO_RCVBUF is initially 65535 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 2(13378) INFO: fifo process starting: 13378 2(13378) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... 0(13376) REGISTER: Authenticating user 0(13376) REGISTER: challenging user 0(13376) REGISTER: Authenticating user 0(13376) REGISTER: challenging user 0(13376) REGISTER: Authenticating user 0(13376) REGISTER: challenging user 0(13376) REGISTER: Authenticating user 0(13376) REGISTER: challenging user 0(13376) REGISTER: Authenticating user 0(13376) REGISTER: challenging user 0(13376) REGISTER: Authenticating user 0(13376) REGISTER: challenging user
---ser.cfg--
# # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) listen=202.71.135.219 /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" #loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" #loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 2) modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") #modparam("uri_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf") modparam("auth_radius", "service_type", 15)
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #modparam("acc", "log_level", 1) #modparam("acc", "radius_flag", 1)
# ------------------------- request routing logic ------------------- alias=sip.net4india.com
# main routing logic
route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it)
if (method=="REGISTER") { log(1, "REGISTER: Authenticating user\n"); if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; save("location"); break; }; if (method=="INVITE") { log(1, "INVITE\n"); setflag(1); /* set for accounting (the same value as inlog_flag!) */ };
if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as inlog_flag!) */ };
if (method=="BYE" || method=="CANCEL") { log (1, "BYE or CANCEL\n"); setflag(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; if (!t_relay()) { sl_reply_error(); break; };}
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers