#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no# (cmd line: -E)

listen=10.0.100.12

/* Uncomment these lines to enter debugging mode 
fork=no
log_stderror=yes
*/

check_via=no# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/domain.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/textops.so"
loadmodule "/usr/lib/ser/modules/acc.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url", "mysql://ser:hello@localhost/ser")
modparam("usrloc", "use_domain", 1)


# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -- domain params --
modparam("domain", "db_url", "mysql://ser:hello@localhost/ser")
modparam("domain", "db_mode", 1)
modparam("domain", "domain_table", "domain")
modparam("domain", "domain_col", "domain")


# -- registrar params --
modparam("registrar", "use_domain", 1)

# -- acc params --
# set the reporting log level
modparam("acc", "log_level", 1)
# number of flag, which will be used for accounting; if a message is
# labeled with this flag, its completion status will be reported
modparam("acc", "log_flag", 1 )

# -------------------------  request routing logic -------------------


# main routing logic 
  
 route{
  
         # initial sanity checks ? messages with 
         # max_forwards==0, or excessively long requests 
         if (!mf_process_maxfwd_header("10")) { 
                 sl_send_reply("483","Too Many Hops"); 
                 break; 
         }; 
         if ( msg:len > max_len ) { 
                 sl_send_reply("513", "Message too big"); 
                 break; 
         }; 
  
         # we record-route all messages ? to make sure that 
         # subsequent messages will go through our proxy; that's 
         # particularly good if upstream and downstream entities 
         # use different transport protocol 
         record_route(); 
         # loose-route processing 
         if (loose_route()) { 
                 t_relay(); 
                 break; 
         }; 

	 if(uri==is_from_local()) {
		sl_send_reply("600", "is local");
		break;
  	 };
         # if the request is for other domain use UsrLoc 
         # (in case, it does not work, use the following command 
         # with proper names and addresses in it) 
        if (uri==myself) {
  	#if (is_from_local()) {
   	    if (method=="REGISTER") { 
  
   	    # Uncomment this if you want to use digest authentication 
	    #if (!www_authorize("proxy.example.org", "subscriber")) { 
	    #    www_challenge("proxy.example.org", "0"); 
	    #    break; 
	    #    }; 
	    #
	    #save("location"); 
	        break; 
	        }; 
  
	    lookup("aliases"); 
  
   	    # native SIP destinations are handled using our USRLOC DB 
	    if (!lookup("location")) { 
	        sl_send_reply("404", "Not Found"); 
	        break; 
	        }; 
             }; 

         # forward to current uri now; use stateful forwarding; that 
         # works reliably even if we forward from TCP to UDP 
         if (!t_relay()) { 
                 sl_reply_error(); 
         }; 
  
 }