Hi,
the p-, i- and scscf.sh files are not required, because these are from the origin OpenIMScore which I installed in an intermediate step (which led to an step4-image with origin OpenIMScore).
Unfortunately the log-file which I provided yesterday also included this part. I now have updated the log-file (now attached) and eliminated this part (step4) which is not relevant for IMS on Kamailio.
Now, how to start the platform:
HSS: see line 591 – 596
P-CSCF: line 609 kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg
I-CSCF: line 614 kamailio -f /usr/local/etc/kamailio/kamailio-icscf.cfg
S-CSCF: line 621 kamailio -f /usr/local/etc/kamailio/kamailio-scscf.cfg
Additional info:
I configured for testing the kamailio -instances to run in foreground. Therefore you need at least 4 console windows (HSS, P-, I- and S-CSCF). For starting tcpdump for trace-file you need a 5th console.
I prefer to use “screen” command to generate the different screens.
I hope that helps.
For the basic call I used two IMS clients (“Mercuro Silver” and “Boghe”) running on the Windows host. The clients are configured as Alice and Bob with authentication AKAv1-MD5.
Authentication data are in HSS preconfigured.
If you do not have IMS clients you can start with pure SIP-clients (using digest authentication MD5 instead of AKAv1-MD5).
But for that you have to change the REG_AUTH_DEFAULT_ALG parameter in scscf.cfg accordingly.
And probably also the default authentication scheme in HSS (USER IDENTITIES -> Private Identity).
I did not test this. But in case of problems you should provide a tracefile produced with “tcpdump -i any -s 3000 -w /var/tmp/trace.pcap not port 22 and not port 3306”.
Good luck.
Franz
From: Ramya Y [mailto:y.ramya146@gmail.com]
Sent: Thursday, January 7, 2016 3:13 PM
To: Daniel-Constantin Mierla <miconda@gmail.com>; Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Cc: franz.edler@technikum-wien.at
Subject: Re: [SR-Users] Kamailio IMS deployment
Hi Franz,
could you please provide me small description about how to start all nodes(HSS,P/I/S-CSCF and basic call.
it would be more helpful to me. And also i was unable to find ./p,i,scscf.sh files under root as described in the log file but i can see only hss.sh .
Thanks in advance!
Regards,
Ramya.
On Thu, Jan 7, 2016 at 2:45 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote: