12 Feb
2007
12 Feb
'07
4:23 p.m.
Thanks it worked but another thing appeared:)
Everything works fine, I see the message being routed again to ser with
different ruri but at the end of the message processing when I invoke the
lookup_contacts("location") function the message is forwarded to the location
which
corresponds to the first ruri which was changed by attr2uri() function.
Please point me what do I miss.
Generally my procedure looks like this:
if inbound user then
check if user have forward_blind parameter
if yes
rewrite ruri (attr2uri("$tr.forward_blind")) and forward with
t_relay()
So for instance when I call myself and have the forward_blind set on the account on which
user is not registered I get the 486 - busy response instead of the unavailable user.
On Mon, 2007-02-12 at 14:32 +0100, tzieleniewski
wrote:
Hi again
I found out that there appears the following error in the log:
Feb 12 14:37:53 rd ser[3979]: parse_nameaddr(): No < found
The attr_destination uses the same uri parser as core, and is able to
accept event the nameaddr specification... so if you put uri without <>
you will get this "warning".
It just rewrites internal next hop, so the t_relay will send it as
appropriate. If you want to rewrite the request uri too use attr2uri
function call together with it.
Michal
Please give me a hand with this issue:)
Thanks in advance
-tomasz
Hi!!
I am trying to set up the blind call forwarding with the usage of attr_destination()
function.
I do the following I load the user attributes from user_attrs and uri_attrs table and
then according to the loaded parameters I do:
if ($tu.call_forward == "blind" && $tr.forward_blind)
{
xlog("L_INFO", " route[CALL_FORWARD]: fwd \n");
attr_destination("$tr.forward_blind");
xlog("L_INFO", " route[CALL_FORWARD]: route(FORWARD) \n");
route(FORWARD);
xlog("L_INFO", " route[CALL_FORWARD]: drop \n");
drop;
}
after the ser.cfg logic goes through this part I don't see any change in the request
uri?? Please point me what do I miss?
here is my database contents:
mysql> select * from user_attrs where uid like 'hellboy%' and name like
'call_%';
+----------------------+--------------+-------+------+-------+
| uid | name | value | type | flags |
+----------------------+--------------+-------+------+-------+
| hellboy(a)voip.touk.pl | call_forward | blind | 2 | 1 |
+----------------------+--------------+-------+------+-------+
1 row in set (0.00 sec)
mysql> select * from uri_attrs where username like 'hellboy%';
+----------+--------------+---------------+----------------------+------+-------+--------+
| username | did | name | value | type | flags | scheme
|
+----------+--------------+---------------+----------------------+------+-------+--------+
| hellboy | voip.touk.pl | forward_blind | sip:tzl@voip.touk.pl | 2 | 1 | sip
|
+----------+--------------+---------------+----------------------+------+-------+--------+
1 row in set (0.00 sec)
Cheers
-tomasz
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers