Edgardo,

What’s your SER version?

Me either.

I even couldn’t put modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") into ser.cfg. It showed error in file.

It seemed 0.8.14 doesn’t like it.

From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Edgardo O. Gonzales II
Sent: April 27, 2005 11:17 AM
To: Barry Murphy; Kofi Obiri-Yeboah
Cc: serusers@lists.iptel.org
Subject: Re: [Serusers] ACC into mysql

Hi!

my accounting is still not working though im not receiving any error message during my startup.
Its nto logging my transaction on my db.

Can you please check my ser.cfg file below .. Please put your comments ..

thanks,
ed

======================

debug=7
#fork=no
#log_stderror=yes

check_via=no
dns=no
rev_dns=no
port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/ser/lib/ser/modules/mysql.so"
loadmodule "/usr/local/ser/lib/ser/modules/sl.so"
loadmodule "/usr/local/ser/lib/ser/modules/tm.so"
loadmodule "/usr/local/ser/lib/ser/modules/rr.so"
loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/ser/lib/ser/modules/registrar.so"
loadmodule "/usr/local/ser/lib/ser/modules/auth.so"
loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/ser/lib/ser/modules/acc.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 1)
modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser")

# -- auth params --

modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")

# -- rr params --

modparam("rr", "enable_full_lr", 1)

# -- acc params --

modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 3)
modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("acc", "db_flag", 2)
modparam("acc", "failed_transactions", 1)

# ------------------------- request routing logic -------------------

alias=test.com

# main routing logic

route{
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        record_route();
        if (loose_route()) {
                t_relay();
                break;
        };

        if (uri=~"test.com") {
                if (method=="REGISTER") {
                       setflag(1);
                       setflag(2);

                        if (!www_authorize("test.com", "subscriber")) {
                                www_challenge("test.com", "0");
                                break;
                        };

                        save("location");
                        break;
                };

                lookup("aliases");

                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        if (!t_relay()) {
                sl_reply_error();
        };

}

======================================

At 02:47 PM 4/26/2005, Barry Murphy wrote:

Mine works, just I dont get the BYE into mysql, even though I see it in ngrep.

Secondly if i call my PBX (Asterisk) via ser and the asterisk hangs up after giving the time, the call doesnt end on SER it remains connected.

Stupid stupid thing :(

Barry

----- Original Message -----

From: Edgardo O. Gonzales II

To: Kofi Obiri-Yeboah

Cc: serusers@lists.iptel.org

Sent: Tuesday, April 26, 2005 6:29 PM

Subject: RE: [Serusers] ACC into mysql

Thanks again for your help .. Here's my running ser.cfg

Hope you can help me make my accounting work..

thanks,

================================================================

# ----------- global configuration parameters ------------------------

#debug=3

#fork=yes

#log_stderror=no

#debug=7

#fork=no

#log_stderror=yes

check_via=no

dns=no

rev_dns=no

#port=5060

#children=4

fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

loadmodule "/usr/local/ser/lib/ser/modules/mysql.so"

loadmodule "/usr/local/ser/lib/ser/modules/sl.so"

loadmodule "/usr/local/ser/lib/ser/modules/tm.so"

loadmodule "/usr/local/ser/lib/ser/modules/rr.so"

loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so"

loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so"

loadmodule "/usr/local/ser/lib/ser/modules/registrar.so"

loadmodule "/usr/local/ser/lib/ser/modules/auth.so"

loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so"

loadmodule "/usr/local/ser/lib/ser/modules/acc.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 1)

modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser")

# -- auth params --

modparam("auth_db", "calculate_ha1", yes)

modparam("auth_db", "password_column", "password")

# -- rr params --

modparam("rr", "enable_full_lr", 1)

# -- acc params --

modparam("acc", "log_level", 1)

modparam("acc", "log_flag", 1)

modparam("acc", "log_missed_flag", 3)

# ------------------------- request routing logic -------------------

alias=abc.com.ph

# main routing logic

route{

if (!mf_process_maxfwd_header("10")) {

sl_send_reply("483","Too Many Hops");

break;

};

if ( msg:len > max_len ) {

sl_send_reply("513", "Message too big");

break;

};

record_route();

if (loose_route()) {

t_relay();

break;

};

if (uri=~"abc.com.ph") {

if (method=="REGISTER") {

if (!www_authorize("abc.com.ph", "subscriber")) {

www_challenge("abc.com.ph", "0");

break;

};

save("location");

break;

};

lookup("aliases");

if (!lookup("location")) {

sl_send_reply("404", "Not Found");

break;

};

if (!t_relay()) {

sl_reply_error();

};

}

================================================================

At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote:

I am assuming your question is if the record_route() function is a parameter for accounting? If that was your question then the answer is no. Generally you invoke record_route() to ensure acl acceptance on a gateway (i.e. all calls through that gateway)

-----Original Message-----

From: Edgardo O. Gonzales II [ mailto:edgardo.g@pacific.net.ph]

Sent: Monday, April 25, 2005 6:22 PM

To: Kofi Obiri-Yeboah

Cc: serusers@lists.iptel.org

Subject: RE: [Serusers] ACC into mysql

Hi Kofi!

got it.. thanks for immediate feedback .. however my accounting is not working.

any parameters to be added to make it work..

I have the following info already on my ser.cfg

modparam("acc", "log_level", 1)

modparam("acc", "log_flag", 1)

modparam("acc", "log_missed_flag", 3)

record_route(); -> its this a parameter for accounting

thanks,

At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote:

I think the correct modparam statement should read as follows:

modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")

please note that "my" is required in front of sql

and not:

modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")

-----Original Message-----

From: serusers-bounces@lists.iptel.org [ mailto:serusers-bounces@lists.iptel.org]On Behalf Of Edgardo O. Gonzales II

Sent: Monday, April 25, 2005 5:20 PM

To: serusers@lists.iptel.org

Subject: Re: [Serusers] ACC into mysql

Hi all!

Im also receiving this error message.

Can somebody help us on how to make accounting work using mysql.

thanks,

At 06:01 AM 4/26/2005, Leon Sun wrote:

Hi,

I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql followed instruction from manual. I found, first, modparam("acc", "db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad config file (1 errors)

If I disabled it, SER worked fine but I couldnt see any record in acc table.

Would anyone suggest how to put call records into Mysql?

Thank you.

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd)

#fork=yes

#log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode

debug=7

fork=no

log_stderror=yes

check_via=no # (cmd. line: -v)

dns=no # (cmd. line: -r)

rev_dns=no # (cmd. line: -R)

#port=5060

#children=4

fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database

loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/acc.so"

loadmodule "/usr/lib/ser/modules/sl.so"

loadmodule "/usr/lib/ser/modules/tm.so"

loadmodule "/usr/lib/ser/modules/rr.so"

loadmodule "/usr/lib/ser/modules/maxfwd.so"

loadmodule "/usr/lib/ser/modules/usrloc.so"

loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication

# mysql.so must be loaded !

loadmodule "/usr/lib/ser/modules/auth.so"

loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database

# for persistent storage and comment the previous line

modparam("usrloc", "db_mode", 2)

# -- auth params --

# Uncomment if you are using auth module

modparam("auth_db", "calculate_ha1", yes)

# If you set "calculate_ha1" parameter to yes (which true in this config),

# uncomment also the following parameter)

modparam("auth_db", "password_column", "password")

# -- rr params --

# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)

modparam("acc","log_level",1)

modparam("acc","log_flag",1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with

# max_forwards==0, or excessively long requests

if (!mf_process_maxfwd_header("10")) {

sl_send_reply("483","Too Many Hops");

break;

};

if ( msg:len > max_len ) {

sl_send_reply("513", "Message too big");

break;

};

# we record-route all messages -- to make sure that

# subsequent messages will go through our proxy; that's

# particularly good if upstream and downstream entities

# use different transport protocol

record_route();

# loose-route processing

if (loose_route()) {

if (method=="BYE") {

setflag(1);

setflag(2);

}

t_relay();

break;

};

#labeled all transaction for accounting

setflag(1);

setflag(2);

if (method=="CANCEL"){

t_relay();

};

# (in case, it does not work, use the following command

# with proper names and addresses in it)

if (uri==myself) {

# This for PSTN destination

if (uri=~"^sip:1")

{ rewritehost("10.10.10.10");

forward(10.10.10.10,5060);

break;

}

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication

if (!www_authorize("sip.mycommunications.com", "subscriber")) {

www_challenge("sip.mycommunications.com", "0");

break;

};

save("location");

break;

};

# native SIP destinations are handled using our USRLOC DB

if (!lookup("location")) {

sl_send_reply("404", "Not Found");

break;

};

# forward to current uri now; use stateful forwarding; that

# works reliably even if we forward from TCP to UDP

if (!t_relay()) {

sl_reply_error();

};

}

_______________________________________________

Serusers mailing list

serusers@lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers

_______________________________________________

Serusers mailing list

serusers@lists.iptel.org

http://lists.iptel.org/mailman/listinfo/serusers