Hello All;
I`m trying  to tune openser-1.2.2 with dbtext data base
But have some problems.
I make db use - textdb.sh
Then add users use - sc.dbtext
and add to openser.cfg:
#set module path
mpath="/usr/local/lib/openser/modules/"

# use dbtext database
loadmodule "dbtext.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so "
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"

# Uncomment this if you want digest authentication
loadmodule "auth.so"
loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- mi_fifo params --

modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")

# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# use dbtext database for persistent storage
modparam("usrloc", "db_mode", 2)
modparam("usrloc|auth_db", "db_url", "dbtext:///usr/local/etc/openser/dbtext")

# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
modparam("auth_db", "user_column", "username")
modparam("auth_db", "password_column", "password")
modparam("auth_db", "domain_column", "domain")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        log(1, "Too Many Hops\n");
        exit;
    };

    if (msg:len >=  2048 ) {
        sl_send_reply("513", "Message too big");
        log(1, "Message too big\n");
        exit;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER")
        record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
        # mark routing logic in request
        append_hf("P-hint: rr-enforced\r\n");
        route(1);
    };
    if (!uri==myself) {
        # mark routing logic in request
        append_hf("P-hint: outbound\r\n");
        # if you have some interdomain connections via TLS
        #if(uri=~"@tls_domain1.net") {
        #    t_relay("tls:domain1.net");
        #    exit;
        #} else if(uri=~"@tls_domain2.net") {
        #    t_relay("tls:domain2.net");
        #    exit;
        #}
        route(1);
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

        if (method=="REGISTER") {
            log(1, "this is a request REGISTER users\n");

            if (!www_authorize("my.domain", "subscriber")) {
                log(1, "this is a www_challenge\n");
                www_challenge("my.domain", "0");
                exit;
            };

            save("location");
            exit;
        };

but when trying REGISTER user use(sjphone) in log i see:
Nov 28 17:30:03 devel s-eltex[12797]: this is a request for my.domain users
Nov 28 17:30:03 devel s-eltex[12797]: this is a request REGISTER users
Nov 28 17:30:03 devel s-eltex[12797]: this is a www_challenge
Nov 28 17:30:03 devel s-eltex[12794]: this is a request for my.domain users
Nov 28 17:30:03 devel s-eltex[12794]: this is a request REGISTER users
Nov 28 17:30:03 devel s-eltex[12794]: get_ha1(): Error while querying database


In sjphone LOG i see:
Service unavailable
server error;

What do I adjust not correctly?