[Serusers] sems problem!

I install cvs answer_machine as sems. And I try to start sems. It's appear error message: (2639) ERROR: reloadFile (SemsConfiguration.cpp:178): /usr/local/etc/sems/sems.conf:123 configuration error: duplicate declaration for config.announcement (2639) ERROR: reportConfigError (SemsConfiguration.cpp:274): /usr/local/etc/sems/sems.conf:113 configuration: this is the previous location But line113==> config.announcement=inline line 123==> config.announcement=end and I use sems.conf.sample as my sems.conf file could someone tell me how to solve it. thanks. ----- # $Id: sems.conf.sample,v 1.17 2004/07/19 20:43:14 sayer Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value1, value2 # i like this option # ################################## # global parameters # ################################## # optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) # (fork=no is the same as -E) fork=yes # optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr # (stderr=yes is the same as -E) stderr=no # optional parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3) # (same as -D) loglevel=1 # optional parameter: fifo_name=<filename> # # - path and file name of our fifo file (same as -i) fifo_name=/tmp/am_fifo # optional parameter: ser_fifo_name=<filename> # # - path and file name of Ser's fifo file (same as -o) ser_fifo_name=/tmp/ser_fifo # optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/usr/local/lib/sems/plug-in/ # optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=localhost # optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25 # optional parameter: rtp_low_port=<port> # # - sets port of rtp lowest server #rtp_low_port=1024 # optional parameter: rtp_high_port=<port> # # - sets port of rtp highest server #rtp_high_port=65535 ################################## # module specific parameters # ################################## # sample voicemail configuration (inline) config.voicemail=inline # optional parameter: rec_file_extension=<ext> # # - sets the file extension which will be used # to record messages. # - example 1: wav # - example 2: mp3 # # WARNING: you must compile the mp3 plug-in # in order to use 'mp3' as default # extension. You will need the lame # encoder for that. # See plug-in/mp3/ReadmeMP3.txt for # more information. # rec_file_extension=wav # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for # - the file to be played is determined the following way: # <announce_path>/<domainname>/<username>.wav # if this file is not available <announce_path>/<default_anounce> is used announce_path=/usr/local/lib/sems/audio/ # parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # parameter: max_record_time=<seconds> # # - maximum record time max_record_time=30 # parameter: accept_delay=<x> # # - delays accepting of the call for x seconds # - default value is 0 accept_delay=0 # parameter: email_template=<filename> # # - email template file # # See the README file in <sems-src>/plug-in/voicemail # for more information on the syntax used. # email_template=/usr/local/lib/sems/plug-in/mail.template # end of configuration section for voicemail module config.voicemail=end # sample announcement configuration (inline) config.announcement=inline # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for announce_path=/usr/local/lib/sems/audio/ # parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # end of configuration section for announcement module config.announcement=end # sample isdngw module configuration (external file) # config.isdngw=/etc/isdngw.conf # sample ivr module configuration (inline) config.ivr=inline # # # The IVR checks for a script with the named of the callee # (<local part in r-uri>.py for python, <local part in r-uri>.pl for perl) # in the directory <ivr_script_path><domain>, then for # <ivr_script_path><domain><ivr_script_file>. If this is not found, # <ivr_script_path>/<local part in r-uri>.py if searched, # and if this is not found, <ivr_script_path>/<ivr_script_file> is used. # # So with a call to sayer(a)iptel.org and #ivr_script_path=/etc/ivr and #ivr_script_file=ivr.py # these files are checked: #/etc/ivr/iptel.org/sayer.py #/etc/ivr/iptel.org/ivr.py #/etc/ivr/sayer.py #/etc/ivr/ivr.py # #parameter: ivr_script_path: # path to ivr scripts. # ivr_script_path=/etc/ivr/ # default script file: this will be executed if <user>.py does not exist. # ivr_script_file=ivr.py # parameter : tts_caching # y or n # text will be read from waves already synthesized and # cached in cache_path tts_caching=y # parameter : tts_cache_path # path to cache waves # path must exist! tts_cache_path=/tmp/wavs # end of configuration section for ivr module config.ivr=end # sample conference configuration (inline) config.conference=inline # parameter: default_announce=<filename> # # - sets the full pathed name of the default announce WAV file. # Will be played to lonely users. default_announce=/usr/local/lib/sems/audio/first_participant.wav # end of configuration section for conference module config.conference=end # example configuration for number reader config.number_reader=inline number_path=/usr/local/lib/sems/audio/ prolog_file=welcome_to_number_reader.wav epilog_file=thanks_calling_number_reader.wav # end of number_reader configuration config.number_reader=end # add more module configurations here (inline or external): # # config.mymodule=<filename> # or # config.mymodule=inline # ... # config.mymodule=end