23 Mar
2006
23 Mar
'06
3:37 p.m.
ok :)
what version are you using? does is crash on start-up or on first
request? can you provide the backtrace?
regards,
bogdan
Joao Pereira wrote:
Yes, with "fork=no" I found the problem:
Segmentation fault (core dumped)
:P
Bogdan-Andrei Iancu wrote:
Hi Joao,
try yo start openser in foreground - set fork=no and log_stderror=yes
in your config. Maybe you will get a hint.
regards,
bogdan
Joao Pereira wrote:
Yes, I did "ps fax" and there was no
OpenSER.
How can I find the error? Even with a higher debug level, there are
no errors in the stdout:
(debug level = 8)
Listening on
Aliases:
*: mex.fccn.pt:*
*: XXX.XXX.XXX.XXX:*
0(22568) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
0(22568) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548
0(22568) fm_malloc_init(0xf4eb1000, 33554432), start=0xf4eb1000
0(22568) shm_mem_init: success
0(0) core dump limits set to 4294967295
0(0) DEBUG: init_mod: postgres
postgres - initializing
0(0) DEBUG: init_mod: sl_module
stateless - initializing
0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered
0(0) unixsock_register_cmd: New command (sl_stats) registered
0(0) DEBUG: MD5 calculated: 1d0376a2244771bba12e9da5f03652d9
0(0) DEBUG: init_mod: tm
0(0) TM - (size of cell=2832, sip_msg=768) initializing...
0(0) Call-ID initialization: '2ffddfe3'
0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered
0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered
0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered
0(0) unixsock_register_cmd: New command (t_uac_dlg) registered
0(0) unixsock_register_cmd: New command (t_uac_cancel) registered
0(0) unixsock_register_cmd: New command (t_hash) registered
0(0) unixsock_register_cmd: New command (t_reply) registered
[root@mex openser-1.0.1-tls]# 0(0) DEBUG: lock_initialize: lock
initialization started
0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered
0(0) unixsock_register_cmd: New command (t_stats) registered
Could be a problem in the certificates?
Joao Pereira
Daniel-Constantin Mierla wrote:
Hello,
did you check with "ps auxw | grep openser"? Wasn't there any
openser process running. From the logs looks like openser started
ok (tm module initialized succesfully - is it tm you last module in
the loadmodule list?).
Cheers,
Daniel
On 03/22/06 14:21, Joao Pereira wrote:
> Hello to all
> Im trying to put OpenSER to work with TLS.
> I created the certificates, and configured openser.cfg. ("openser
> -c" shows no errors)
> But when I start OpenSER, there are no errors, but the server
> doesn't start:
> It says this (with debug level 4) :
>
> Listening on
> Aliases:
> *: mex.fccn.pt:*
> *: XXX.XXX.XXX.XXX:*
>
> 0(22549) fm_malloc_init: F_OPTIMIZE=16384, /ROUNDTO=2048
> 0(22549) fm_malloc_init: F_HASH_SIZE=2067, fm_block size=16548
> 0(22549) fm_malloc_init(0xf4eb1000, 33554432), start=0xf4eb1000
> 0(22549) shm_mem_init: success
> 0(0) core dump limits set to 4294967295
> 0(0) DEBUG: init_mod: postgres
> postgres - initializing
> 0(0) DEBUG: init_mod: sl_module
> stateless - initializing
> 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered
> 0(0) unixsock_register_cmd: New command (sl_stats) registered
> 0(0) DEBUG: MD5 calculated: 1d0376a2244771bba12e9da5f03652d9
> 0(0) DEBUG: init_mod: tm
> 0(0) TM - (size of cell=2832, sip_msg=768) initializing...
> 0(0) Call-ID initialization: '6efffbed'
> 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered
> 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered
> 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered
> 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered
> 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered
> 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered
> 0(0) unixsock_register_cmd: New command (t_hash) registered
> 0(0) unixsock_register_cmd: New command (t_reply) registered
> [root@mex openser-1.0.1-tls]# 0(0) DEBUG: lock_initialize: lock
> initialization started
> 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered
> 0(0) unixsock_register_cmd: New command (t_stats) registered
>
>
> and nothing happens... OpenSER isnt runnig :(
>
--------------------------------------------------------------------------------------------------------------
>
>
> this is a part of my openser.cfg:
>
> listen = tls:XXX.XXX.XXX.XXX
>
> tls_port_no = 5062
> tls_method=SSLv23
>
>
tls_certificate="/services/openser/openser-1.0.1-tls/tls/tools/rootCA/cacert.pem"
>
>
tls_private_key="/services/openser/openser-1.0.1-tls/tls/tools/rootCA/private/cakey.pem"
>
>
tls_ca_list="/services/openser/openser-1.0.1-tls/tls/tools/rootCA/certs/01.pem"
>
>
> tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA"
>
> tls_verify = 1
> tls_require_certificate = 1
> tls_handshake_timeout=119 # number of seconds
> tls_send_timeout=121 # number of seconds
>
>
> If you know whats the problem, please tell me :)
> Thanks
> Joao Pereira
>
> _______________________________________________
> Users mailing list
> Users(a)openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users