Hi,
thanks for reply my email. I made the following test: I sent five different messages:
one
two
three
four
five
and I traced the SIP traffic passing through the server. They were stored in the DB in the
correct sequence. So far so good. Now comes the problem, I saw the IM going out from my
SIP Server and the sequence was wrong:
three
five
two
four
one
And exactly in that way appeared the IM in my client when the user went online.
In my opinion the IM were not properly sent when they went out from OpenSER
Cheers,
Cesar
-----Ursprüngliche Nachricht-----
Von: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro]
Gesendet: Donnerstag, 04. Oktober 2007 13:28
An: Cesar Troncoso
Cc: users(a)openser.org
Betreff: Re: [OpenSER-Users] MSILO: dump stored messages
Hello,
they should be sent in order of receiving -- however I will double
check. Because they are sent in a very short time frame, maybe the get
in a different order to the user, because of network transmission. Can
you watch the sip traffic sent by proxy?
Cheers,
Daniel
On 10/04/07 13:39, Cesar Troncoso wrote:
Hello,
I have a problem by using the MSILO Module. The messages stored in the
DB (table SILO) are not sent in the right sequence. Therefore when the
user goes online again and receives the messages previously stored in
the DB, he is not able to understand them. Any Ideas or suggestions
how to deal this problem?
Thanks,
Cesar
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users