24 Jun
2020
24 Jun
'20
12:05 p.m.
Hello,
can you send a pcap with a call reproducing such case? I can check it
with the c code and see if something is mismatched.
Cheers,
Daniel
On 09.06.20 13:00, George Diamantopoulos wrote:
Hello again,
This might turn out to be a bug, but I'm posting here first because my
config is fairly complicated and it might not be the sanest it could
be. The problem manifests as follows: with the sole change being the
enabling of track_cseq_updates for the dialog module, kamailio fails
to process the 100 Trying it receives following authentication
initiated by the uac_auth() function. Without the track_cseq_updates
option enabled, the call proceeds successfully, albeit with the CSeq
for the auth-carrying INVITE having the same value as the original.
Here's a simplified version of the configuration routes involved in this:
request_route {
...
route(DISPATCH_PROVIDER);
...
}
route[DISPATCH_PROVIDER] {
if ( !ds_select_dst("10", "8") ) {
t_send_reply("503", "Downstream carrier unavailable");
exit;
}
t_on_branch_failure("DISPATCH_PROVIDER_FAILOVER");
t_on_branch("PROVIDER_BRANCH");
t_on_failure("DISPATCH_PROVIDER_FAILURE");
route(RELAY);
exit;
}
failure_route[DISPATCH_PROVIDER_FAILURE] {
if (t_is_canceled()) {
exit;
}
if ( t_check_status("401|407") ) {
$avp(arealm) = "authrealm.com <http://authrealm.com>";
$avp(auser) = "authusername";
$avp(apass) = "verys3kr1t";
uac_auth();
t_on_branch("PROVIDER_BRANCH");
t_on_branch_failure("DISPATCH_PROVIDER_FAILOVER");
t_on_failure("DISPATCH_PROVIDER_FAILURE");
$du = "sip:" + $T_rpl($si) + ":" + $T_rpl($sp); // I'll
explain why this is here later in this e-mail
t_relay();
exit;
}
}
branch_route[PROVIDER_BRANCH] {
uac_replace_from("$dlg_var(my_new_from)");
uac_replace_to("$dlg_var(my_new_to)");
$rU = "my new RURI user";
}
event_route[tm:branch-failure:DISPATCH_PROVIDER_FAILOVER] {
if (t_is_canceled()) {
exit;
}
if ( t_check_status("401|407") ) {
return;
# next DST - only for 5xx or local timeout
} else if ( t_check_status("5[0-9][0-9]") || (t_branch_timeout()
&& !t_branch_replied()) ) {
if ( ds_next_dst() ) {
t_on_branch("PROVIDER_BRANCH");
t_on_branch_failure("DISPATCH_PROVIDER_FAILOVER");
t_on_failure("DISPATCH_PROVIDER_FAILURE");
route(RELAY);
exit;
} else {
xlog("L_NOTICE", "--- SCRIPT_DISPATCH_PROVIDER_FAILOVER:
Failed to route request to PROVIDER! Giving Up. Negative response will
be sent upstream.\n");
}
}
}
One will rightfully wonder why use both branch-failure routes and
failure_route to handle things. Well, it's not obvious from this
because the relevant parts are removed for brevity, but I'm generally
using branch failure event routes to try other destinations in the
same destination set, and failure routes to additionally try other
downstream "providers" in case all entries is the current destination
set have failed. I don't think these actions/routes are relevant
because the problem manifests without any of these failover mechanisms
(of switching over to the next provider) engaging.
Regarding the line "$du = "sip:" + $T_rpl($si) + ":" +
$T_rpl($sp);"
in the failure_route, which might seem a little odd, this was added
because without it, uac_auth() will send the auth-carrying INVITE
always to the first destination in the destination set even if
ds_next_dst has been called from the branch-failure event route.
Unfortunately I haven't been able to determine if this actually
helped, because I have only received a 5xx error once from the
downstream peer before the "fix" and haven't been able to reproduce
this since then. But that's another issue unrelated to the one I'm
asking about here.
So what happens with track_cseq_updates enabled is, after uac_auth()
successfully sends the authenticated INVITE and the peer starts
sending provisional responses, kamailio doesn't seem to acknowledge
them. Instead, it will retransmit the auth INVITE as if there was a
firewall preventing the 1xx responses from being admitted. Then, the
timeout will engage and the configuration script will behave as if
t_branch_timeout returns true (it will do ds_next_dst).
So I was wondering if this is to be expected with this configuration,
or if this should be reported as a bug. Thanks!
Best regards,
George
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla