Re: [Serusers] Radius Accounting

The BYE is loose routed, thus it will go to route(1). g-)

Caxton wrote:

Hi all:

I have installed radius server, and I also configure the "ser.cfg" 

for the radius accounting. However, there is a problem confues me.

While the sip session have set up, the radiusclient send a 

Request-Account packet to radius server immediately, than radius server can save the start-up time of the session into database. But after the session terminated, radiusclient do nothing(it should send a Accounting-Stop packet to radius server)!! Therefore, I can not have a complete time record.

I try to look up the solution in seruser mailing list, but I can 

not find what I want. Please help me, thanks.

Sincerely

Caxton

-----ser.cfg-----

[cut]

# -- acc params -- modparam("acc", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "log_level", 2) modparam("acc", "radius_flag", 1) modparam("acc", "report_ack", 0) # ------------------------- request routing logic -------------------

# main routing logic route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (msg:len >=  2048 ) {
            sl_send_reply("513", "Message too big");
            break;
    };
    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER") record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
            # mark routing logic in request
            append_hf("P-hint: rr-enforced\r\n");
            route(1);
            break;
    };

    if (!uri==myself) {
            # mark routing logic in request
            append_hf("P-hint: outbound\r\n");
            route(1);
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {
                   log(1, "REGISTER: Authenticating user\n");

# Uncomment this if you want to use digest authentication if (!www_authorize("pc80.s206.tj.mcu.edu.tw http://pc80.s206.tj.mcu.edu.tw/", "subscriber")) { log(1, "REGISTER: Chanllenging user\n"); www_challenge(" pc80.s206.tj.mcu.edu.tw http://pc80.s206.tj.mcu.edu.tw/", "0"); break; }; save("location"); break; }; if(method=="INVITE") { log(1, "INVITE\n"); setflag(1); } if(method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); } if(method=="BYE"||method== "CANCEL") { log(1, "BYE or CANCEL\n"); setflag(1); }

[cut]

---

Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers