Hello,

On 11/12/13 13:19, Helena Garcia-Nieto wrote:

Hi,

 

The logs weren’t really helpful. I can see that it checked the from was server ips, and no error afterwards…

 

I checked the configuration against the old working config I had in the test environment. Line by line and detected that the error is on the listen lines.

 

I was listening only in the tcp:ip because I want the phones to connect via tcp.

 

I assume my gw connection would be tcp as well, but it seems that it is udp by default?  

 

I added the listen udp:ip and then the packets are sent to the GW, but in udp.

 

Is it ok for the gw since udp is also available, but I was expecting

 

customer -- TCP --> kamailio --- TCP --> GW,

 

Is it not the default config, should I add something special in case TCP to the GW is mandatory?


add 'transport=tcp' as parameter to the URI going to the pstn gateway.

Cheers,
Daniel

 

Thanks again for the help!

 

Helena

 

 

From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: miércoles, 11 de diciembre de 2013 11:07
To: Helena Garcia-Nieto; 'Kamailio (SER) - Users Mailing List'
Subject: Re: [SR-Users] 500 I'm terribly sorry error

 

Hello,

can you set debug=3 in your config file and look at the logs for more information on why is failing?

To discover why a route block is not executed, you can use debugger module with cfgtrace parameter set to 1, then you will see what lines of configuration files are executed and spot what condition didn't evaluate as expected to get to the respective routing block.

Cheers,
Daniel

On 11/12/13 10:51, Helena Garcia-Nieto wrote:

Hey,

 

Yes.

 

Dec 11 08:55:45 server77-68-57-68 /usr/local/sbin/kamailio[13233]: ERROR: <script>:  r-uri (sip:XXXXX771269@202.68.XX.XX:5060) to me it looks ok

 

That is the printing when using the route (pstn) on the routing logic and only adding the xlog on the default route[PSTN]

 

With the full config (attached)

That is the trace just before entering the route (ISKRATEL)

Dec 11 09:25:39 /usr/local/sbin/kamailio[15793]: ERROR: <script>: Helena r-uri (sip:XXX771269@77.XX.XX.XX:7060;transport=tcp)

 

I was not able to get the other printings, and I’m not sure why… since I have the route [ISKRATEL] like:

 

route[ISKRATEL] {

xlog("L_ERR", "Helena 0 r-uri ($ru) \n");

#!ifdef WITH_PSTN

        # check if ISKRATEL GW IP is defined

xlog("L_ERR", "Helena 1 r-uri ($ru) \n");

        if (strempty($sel(cfg_get.iskratel.gw_ip))) {

                xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip not defined\n");

                return;

        }

xlog("L_ERR", "Helena 2 r-uri ($ru) \n");

 

        # only local users allowed to call

        if(from_uri!=myself) {

                sl_send_reply("403", "Not Allowed");

                exit;

        }

 

xlog("L_ERR", "Helena 3 r-uri ($ru) \n");

    

        if (strempty($sel(cfg_get.iskratel.gw_port))) {

                $ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);

        } else {

                $ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip) + ":"+ $sel(cfg_get.iskratel.gw_port);

xlog("L_ERR", "Helena 4 r-uri ($ru) \n");

        }

 

xlog("L_ERR", "Helena 5 r-uri ($ru) \n");

 

        #MORODO Add profix to ISKRATEL: A99901

        subst_uri('/^sip:(.*)/sip:A99901\1/i'); # add A99901

 

 

#MORODO TEST

xlog("L_ERR", "Helena r-uri ($ru) \n");

 

        route(RELAY);

        exit;

#!endif

 

        return;

}

 

I attach the kamailio conf file, in case you can see something on it. Can you advise me on why I’m not getting the xlogs inside the function? And where can be the problem with the 500 I’m terrible sorry?

 

Thanks in advanced!

 

Helena

 

 

 

From: Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Sent: miércoles, 11 de diciembre de 2013 8:39
To: Helena Garcia-Nieto; 'Kamailio (SER) - Users Mailing List'
Subject: Re: [SR-Users] 500 I'm terribly sorry error

 

I already told to pring the $ru, have you done it?

Daniel

On 10/12/13 17:09, Helena Garcia-Nieto wrote:

Hi Daniel,

 

Thanks for the answer but…

 

I already tested if the problem is there and even commenting the prefix out the error is exactly the same.

 

That is why I test it using:

pstn.gw_ip = "10.XX.XX.XX"

pstn.gw_port = "5060"

 

And route(PSTN)

 

Without changing original PSTN routing.

 

I’m getting the same problem.

 

Could you think on something else that can be affecting that?

 

Helena

 

From: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla
Sent: martes, 10 de diciembre de 2013 16:54
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] 500 I'm terribly sorry error

 

Hello,

I guess the r-uri is not correct after your changes. you can try to print $ru with xlog(...) just before the route(RELAY).

You should use string operation to add the prefix instead of using a regular expression substitution, like:

prefix("A99901");

or

$rU = "A99901" + $rU;

Cheers,
Daniel



On 10/12/13 16:19, Helena Garcia-Nieto wrote:

 

Hello,

 

Thanks in advanced for the help. I am almost new with kamailio and still struggling through silly problems so please forgive me if the solution is so obvious.

 

I have a network like

 

Xlitle -- Kamailio -- GW

 

The GW is more or less out of my reach for changing the behaivour.

As devices I have xlitle

Kamailio is on version 4.0.2

 

I’ve changed only few things from the default config file. Add mysql support, auth, userlocdb, pstngw.

 

For this part, gw routing , I’ve defined gw ip and port inside the PSTN definition like:

#!ifdef WITH_PSTN

# PSTN GW Routing

#

# - pstn.gw_ip: valid IP or hostname as string value, example:

# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"

#

# - by default is empty to avoid misrouting

pstn.gw_ip = "" desc "PSTN GW Address"

pstn.gw_port = "" desc "PSTN GW Port"

 

 

iskratel.gw_ip = "10.XX.XX.XX"

iskratel.gw_port = "5060"

 

#!endif

 

I route the calls with:

   route(ISKRATEL);

 

And defined a routing function

route[ISKRATEL] {

#!ifdef WITH_PSTN

        # check if ISKRATEL GW IP is defined

        if (strempty($sel(cfg_get.iskratel.gw_ip))) {

                xlog("SCRIPT: PSTN rotuing enabled but iskratel.gw_ip not defined\n");

                return;

        }

 

 

        # only local users allowed to call

        if(from_uri!=myself) {

                sl_send_reply("403", "Not Allowed");

                exit;

        }

 

        if (strempty($sel(cfg_get.iskratel.gw_port))) {

                $ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip);

       } else {

                $ru = "sip:" + $rU + "@" + $sel(cfg_get.iskratel.gw_ip) + ":"

                                        + $sel(cfg_get.iskratel.gw_port);

        }

 

 

 

        # Add profix to ISKRATEL: A99901

        subst_uri('/^sip:(.*)/sip:A99901\1/i'); # add A99901

 

        route(RELAY);

        exit;

#!endif

 

        return;

}

 

 

I can see that the code goes all the way to the route(relay) but all I can see is the 500 I’m terribly sorry, server error occurred (7/SL) and a second response 500 I’m terribly sorry, server error occurred (7/TM)

 

I’ve tried defining the IP as the given pstn.gw_ip and route(pstn) without changing anything on the  pst default routing but the response of the server is the same.

 

I cannot see any special error on the logs.

 

I have the exact same config for this part, in another test server and the calls go to the gw without reporting any error.

 

I’ll appreciate any help from you! Thanks in advanced for your time

 

Helena






_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users





-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda




-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda



-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda