17 Oct
2011
17 Oct
'11
10:55 a.m.
I will try to look over the sip traces you sent, although it is tight
schedule for the 3.2.0 right now -- so it may take few days.
Cheers,
Daniel
On 10/14/11 10:07 PM, Henrik Aagaard Sørensen wrote:
Yes, pbx.my-domain.com
<http://pbx.my-domain.com> is pointing to the
IP of FreeSwitch.
sip.my-domain.com <http://sip.my-domain.com> is the domain name for
Kamailio.
2011/10/14 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
On 10/14/11 7:06 PM, Henrik Aagaard Sørensen wrote:
--
Daniel-Constantin Mierla -- http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin: http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
My dispatcher.list currently just contains:
1 pbx.my-domain.com:5060 <http://pbx.my-domain.com:5060>
Is
pbx.my-domain.com <http://pbx.my-domain.com> pointing to the IP
address of freeswitch? What is the domain name for kamailio ip
address?
Daniel
I will provide a ngrep trace within an hour or two. Thank you so
much for helping me. I really hope to get this solved.
2011/10/14 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
Hello,
On 10/14/11 4:48 PM, Henrik Aagaard Sørensen wrote:
--
Daniel-Constantin Mierla --http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users Hi Daniel (and everyone else) again.
I've just tried to add:
loadmodule "path.so"
modparam("path", "use_received", 1)
and:
add_path_received()
just before the "if(!t_relay())..." in the ROUTE part.
That made both devices get the error "Too many loops".
what is the content of the dispatcher list file? Maybe is
better to use ds_select_domain(...) and ds_next_domain() --
cannot say it since I haven't seen full sip trace, but maybe
the problem is that freeswitch is sending back if the r-uri
address is kamailio's address.
Cheers,
Daniel
Moving the add_path_received() into the part:
if (nat_uac_test("19")) { if (method=="REGISTER") {
fix_nated_register();
add_path_received();
made the same issues as before loading the path.so module.
2011/10/14 Henrik Aagaard Sørensen
<henrikaagaardsorensen(a)gmail.com
<mailto:henrikaagaardsorensen@gmail.com>>
Hi Daniel (and everyone else).
This is a tshark trace (is that as good as ngrep?) from
Kamailio when there are too many loops:
http://pastebin.com/yRjduB0s
In this trace I got the note that 253 packets was
dropped (and therefor not in the trace).
And this is a trace when it times out:
http://pastebin.com/KT0bJzEU
I've actually looked at the PATH module, and tried
several things. And I know this type of question is
rather newbee-like, but can you help me out with the
PATH module and how to integrate it correctly?
I really do appreciate all the help!
2011/10/14 Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
Hello,
when using the load balancer in front of the
registrar, you have to use PATH extensions for SIP
(see path module in kamailio) in order to be able to
cope with nat.
Then, what would be helpful, will be a ngrep trace
taken on kamailio server for failed calls.
Cheers,
Daniel
On 10/14/11 4:13 PM, Henrik Aagaard Sørensen wrote:
--
Daniel-Constantin Mierla --http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users I've asked a lot of question
about Kamailio
Dispatcher in front of FreeSwitch in this mailing
list. So I'm sorry that I'm still "spamming", but
it still fails.
This is my status so far.
When connecting 2 devices directly to FreeSwitch
everything works. When connecting to Kamailio, some
calls fails with "Timeout" and some fails with "Too
many loops".
This is my kamailio.cfg: http://pastebin.com/KEuZmikh
When connected directly to FreeSwitch where
everything works, this is how my clients are
registrered in FreeSwitch: http://pastebin.com/prkjkb7g
When connected to Kamailio where nothing works,
this is how my clients are registrered in
FreeSwitch: http://pastebin.com/b5x6NZyv
215.197.145.132 (sip.my-domain.com
<http://sip.my-domain.com>) is my Kamailio.
pbx.my-domain.com <http://pbx.my-domain.com> is my
FreeSwitch.
96.224.14.164 is my IP at home, where my 2 devices
are from.
Can anyone help me out? I'm kinda lost at this point.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla --http://www.asipto.com
Kamailio Advanced Training, Dec 5-8, Berlin:http://asipto.com/u/kat
http://linkedin.com/in/miconda -- http://twitter.com/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users