Re: [Serusers] Ser: still no voice outside my LAN with ser and rtpProxy

Hi, I've tried a lot of examples and config. files but still I can't hear any voice when a call is enstablished between users (Nat) outside the Lan where ser in installed (local pc IP 10.0.0.133; LAn router Public IP 80.105.2.110). Tried also from one user outside behind Nat and one in my Lan . I've enclosed trace.log with this case. I've forwarded every ports I think that are needed to 10.0.0.133 (ports 5060 ; udp from 5060 - 5070; 35000 to 35020 ). I've recompiled rtpproxy to use the range of ports 35000-35020. I've also tried the config file from onsip.org for rtpproxy and the one for mediaproxy (with mediaproxy instead of rtpproxy). Whit that config file I've also problems enstablishing the call from outside to inside the Lan. With the ser.cfg that is attached here I can enstablish tha call but no voice (but I can see that 3cx Phone reports packets to be transmitted from both the clients but no packets are received on them). Can someone help me? Thanks ser.cfg : # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) /* Uncomment these lines to enter debugging mode */ fork=no log_stderror=yes listen=10.0.0.133 alias=80.105.2.110 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" #loadmodule "/usr/lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 2) modparam("auth_db|uri_db|usrloc", "db_url","mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # !! Nathelper modparam("nathelper", "natping_interval", 30) # Ping interval 30 s modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT modparam("registrar", "nat_flag", 6) # -- rr params -- modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # !! Nathelper # Special handling for NATed clients; first, NAT test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding is used); also, # the received test should, if completed, should check all # vias for rpesence of received if (nat_uac_test("3")) { # Allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart enough to be symmetric. In some phones it takes a configuration # option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is # called "symmetric media" and "symmetric signalling". fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("80.105.2.110", "subscriber")) { www_challenge("80.105.2.110", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # !! Nathelper # if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){ # sl_send_reply("479", "We don't forward to private IP addresses"); # break; # }; # if client or server know to be behind a NAT, enable relay if (isflagset(6)) { force_rtp_proxy(); }; # NAT processing of replies; apply to all transactions (for example, # re-INVITEs from public to private UA are hard to identify as # NATed at the moment of request processing); look at replies t_on_reply("1"); # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } # !! Nathelper onreply_route[1] { # NATed transaction ? if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); # otherwise, is it a transaction behind a NAT and we did not # know at time of request processing ? (RFC1918 contacts) } else if (nat_uac_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------------------------ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers