Jan,
Thanks, it is working now.. I'm not sure it is the best way to do it, but it works.
Steve
Jan Janak wrote:
Hello,
so is it working now ? I was offline for couple of days and from your previous e-mail I got impression that you had some problems with radius stop messages.
Jan.
On 01-10 09:47, Steven R. Bunin wrote:
Jan,
Here is my config that is allowing both start and stop accounting packages to the system. it is currently doing radius authentication as well. Most likely I will be setting the authentication to by Mysql with just the accounting going to FreeRadius or possibly XTradius in the future.
Steve
# # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("acc","log_level",1) modparam("acc","radius_flag",1) # ------------------------- request routing logic -------------------
# main routing logic
route{
if (method =="INVITE" | method == "BYE") { log(1,"INVITE or BYE\n"); setflag(1); }; if (method=="MESSAGE") { log(1,"MESSAGE\n"); setflag(1); }; if (method=="BYE"){ log (1, "BYEd or CANCEL\n"); setflag(1); }; if (method=="CANCEL"){ log (1, "BYEe or CANCEL\n"); setflag(1); };
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"sip.solaas.com") {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; };
save("location"); break; };
if (uri=~"^sip:[0-9]*@sip.solaas.com") { setflag(1);
log("forwarding to PSTN"); prefix("xxxx"); t_relay_to_udp("xxx.xxx.xxx.xxx","5060"); break; };
# native SIP destinations are handled using our USRLOC DB /* if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; */ }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
Jan Janak wrote:
Please send me the whole config file.
Jan.
On 26-09 12:11, Steven R. Bunin wrote:
Hi all,
I have successfully gotten radius authentication working and I started getting Radius Start records for accounting but I am not sure what I am doing wrong in regards to getting radius Stop records.
Below is the area I believe has the most affect on Radius Acccounting from my Log File. Any suggestions would be appreciated and if it would help to see the full Config file I will send it as well.
record_route();
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { www_challenge("", "0"); break; };
save("location"); break; };
if (method =="INVITE") { log(1,"INVITE\n"); setflag(1); }; if (method=="MESSAGE") { log(1,"MESSAGE\n"); setflag(1); }; if (method=="BYE"){ log (1, "BYE or CANCEL\n"); setflag(1); }; if (method=="CANCEL"){ log (1, "BYE or CANCEL\n"); setflag(1); };
Thanks in advance,
Steve
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Steven R. Bunin - Managing Partner
SOLAAS LLC 10 East 39th Street Suite 1125 New York, NY 10016 (+001) 212-532-6700 Cellular: 646-739-7000 Fax (+001) 212-532-6776
--
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
-- Steven R. Bunin - Managing Partner
SOLAAS LLC 10 East 39th Street Suite 1125 New York, NY 10016 (+001) 212-532-6700 Cellular: 646-739-7000 Fax (+001) 212-532-6776
--
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.