Hi David,

In SDP , what need to be checked . I am not much clear in your reply . Kindly elaborate.

Thanks

On Thu, May 14, 2020 at 4:55 PM David Villasmil <david.villasmil.work@gmail.com> wrote:
Also check the SDPs and make sure you get the internal up of rtpproxy on the internal side, and the external on the external side.

On Thu, 14 May 2020 at 12:18, supreeth herle <herlesupreeth@gmail.com> wrote:
Can you explain some more when you mean by "RTP alone is not coming."? And, how are you checking/verifying that?

Regards,
Supreeth

On Thu, 14 May 2020 at 13:12, Pavithra Mohanraja <pavimohan3004@gmail.com> wrote:
Hi ,

Yes I have configured as you mentioned only . In my pcscf only i have rtpproxy also configured. 
Floating IP i have given in listen address also as
listen = 10.40.10.3:4060 advertise 10.45.4.22:4060

10.40.10.3 - private ip
10.45.4.22 - floating ip
Still RTP alone is not coming.

Is it the only way of configuring NAT ?

Thanks.

On Thu, May 14, 2020 at 4:37 PM supreeth herle <herlesupreeth@gmail.com> wrote:
Hello Pavithra,

Have you tried advertising the floating IP of the VM running RTPProxy as follows?

Edit /etc/default/rtpproxy file as follows:

# Additional options that are passed to the daemon.
EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0"

here, "-l <PUBLIC_IP>"

Hope it helps.

Regards,
Supreeth

On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja <pavimohan3004@gmail.com> wrote:
Hi ,

Could anybody please give me the approach how to configure NAT in kamailio IMS.

I have installed kamailio IMS in openstack environment which has private ips for all four vms (each component in one vm). pcscf has one floating IP attached. I have enabled "WITH_NAT" and configured rtpproxy .

when i make a call from outside of openstack using 2 zoiper clients with outbound proxy keeping floating ip of pcscf, I am getting 200 ok with all SIP packets correctly flowing but there is no RTP Packet.

When i try the same within openstack environment without using public ip, I am getting RTP Packets.

Kindly tell me the procedure of NAT Enablement or do i need to do anything other than this.

Kindly help because i am stuck with this for long time.


Thanks.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,

David Villasmil
email: david.villasmil.work@gmail.com
phone: +34669448337
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users