Re: [Serusers] NAT Problem

if its registered whats the problem, install ngrep to get some output debug, if no response i.e from the client is there a block on messages going to client Iqbal Kamran Ahmad wrote: still working "/usr/local/lib/ser/modules/maxfwd.so" "/usr/local/lib/ser/modules/usrloc.so" >>> >>> >>"/usr/local/lib/ser/modules/registrar.so" >> >> >>> >>> # ----------------- setting module-specific >>>parameters --------------- >>> # -- usrloc params -- >>> modparam("usrloc", "db_mode", 0) >>> >>> >>> # -- rr params -- >>> # add value to ;lr param to make some broken UAs >>>happy >>> modparam("rr", "enable_full_lr", 1) >>> >>> # ------------------------- request routing >>> >>> >>logic >> >> >>>------------------- >>> >>> # main routing logic >>> >>> route{ >>> >>> # initial sanity checks -- messages with >>> # max_forwards==0, or excessively long requests >>> if (!mf_process_maxfwd_header("10")) { >>> sl_send_reply("483","Too Many Hops"); >>> break; >>> }; >>> >>> # we record-route all messages -- to make sure >>> >>> >>that >> >> >>> # subsequent messages will go through our proxy; >>>that's >>> # particularly good if upstream and downstream >>>entities >>> # use different transport protocol >>> record_route(); >>> # loose-route processing >>> if (loose_route()) { >>> t_relay(); >>> break; >>> }; >>> >>> # if the request is for other domain use UsrLoc >>> # (in case, it does not work, use the following >>>command >>> # with proper names and addresses in it) >>> if (uri==myself) { >>> >>> if (method=="REGISTER") { >>> save("location"); >>> break; >>> }; >>> >>> # native SIP destinations are handled using our >>>USRLOC DB >>> if (!lookup("location")) { >>> sl_send_reply("404", "Not Found");