Re: [Serusers] SIP Express Bundle - let's get started

Sounds good, Mike. As we use berlios.de, there's really no official CVS maintainer, so my comment is as good as any.

Why do you need a mirror?

I'm sure we can create a new cvs module in the official repository (though we may want to evaluate whether to use berlios' subversion instead).

If we use subversion, you can use svk to create a mirror.

g-) Mike Trest - Personal wrote: >Greger, et. al. > >While I did volunteer for Documentation and Testing already, >I am going to branch out and perform each step myself >so we can "document as we design". > >To that end I am setting up two "target machines" in New York on which >to install-test-document each step wearing the hat of the Enterprise-IT-Guy. >I have a couple of techs that we can use in the role of "outside tester" who >will strictly follow the documentation to give the procedures a >good Q-A test. >I can be ready in early Janurary. > >I would like to hear from the current CVS maintainer regards creation >of third machine as a Subversion / CVS mirror. Can you contact me >via EMAIL with some guidance? > >Regards, ..mike.. > >At 03:03 AM 12/16/2007, Greger V. Teigre wrote: >>Using kickstart sounds good to me. I think we should keep >>separate the different steps: >>1. Create a base image of the OS >>2. Install the iptel.org apps and dependencies >>3. Do local configurations >>4. Create deployable virtual machine >> >>If each of these steps are isolated, different people can be >>responsible for the different steps. >> >>I have reorganized the project page into sections and incorporated >>lots of input from Jeremy at >><http://iptel.org/bundle/project>http://iptel.org/bundle/project >>We now need to create a project plan, split into responsibilities, >>and take some key decisions. >>I think one key decision that we have already converged on is: for >>first version use CentOS5 and create vmware appliance. >>g-) >> >> >>Jai Rangi wrote: >>>Sounds good, >>>Here is the script. Its been a while that we have used it. We >>>might need to modify something. I can look into it later. Let me >>>know if this is something you are looking for. >>>************************ >>>#!/bin/sh >>># Need to add /bin/sh path >>># This script will install the softwares required to build softswitch. >>># Sysrequirements FC5, DELL 1950, >>># Jai >>># 12/11/06 >>> >>>HOSTNAME=`hostname` >>>TEMPLATE=<http://192.168.2.201/> 192.168.1.1 >>> >>>if [ "`id -u`" != "0" -o `hostname` != "$HOSTNAME" ]; then >>> printf "NEED TO BE ROOT AND TO RUN ON $HOSTNAME\n" >>> exit 0 >>>fi >>> >>>echo "You are ROOT on Make sure you know what are you doing, >>> Press ENTER to continue" >>> >>>read >>> >>>echo "Server name = $HOSTNAME" >>>echo "FTP Server = $TEMPLATE" >>>echo "Press ENTER to start" >>> >>>read >>> >>>printf "PROCEEDING WITH INSTALLATION OF Softswitch on ${HOSTNAME} ...\n\n" >>> >>> >>>printf "ARE YOU SURE YOU WANT TO CONTINUE (Y/N)?" >>>read X >>>if [ "x$X" != "xY" ]; then >>> printf "aborting. Press Y or N \n" >>> exit 0 >>>fi >>>printf "\n" >>> >>>mkdir //home/switch >>>ln -s /home/switch /usr/local/ >>> >>> >>>cd /usr/local/src >>> >>>echo "------INSTALLING freeradius -----------------------------" >>> >>>printf "Do you want to INSTALL FREERADIUS (Y/N)?" >>>read X >>>if [ "x$X" == "xY" ]; then >>>cd /usr/local/src/ >>>wget >>><ftp://ftp.freeradius.org/pub/radius/old/freeradius-1.1.2.tar.gz>ftp://ftp.freeradius.org/pub/radius/old/freeradius-1.1.2.tar.gz >>> >>>tar zxvf freeradius-1.1.2.tar.gz >>>cd freeradius-1.1.2 >>>./configure >>> >>>make >>>make install >>>#cd .. >>>echo "enable digest auth in radiusd.conf, configure >>>clients.conf, create radius db and import tables." >>> >>>else >>>printf "OK YOU Pressed N that means you don't want free radius. >>>No Problem \n" >>>fi >>> >>>echo "------ radius client lib -----------------------------" >>>printf "Do you want to radius client lib (Y/N)?" >>> >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>>cd /usr/local/src/ >>>wget >>><http://download.berlios.de/radiusclient-ng/radiusclient-ng-0.5.2.tar.gz>http://download.berlios.de/radiusclient-ng/radiusclient-ng-0.5.2.tar.gz >>> >>> >>>tar zxvf radiusclient-ng-0.5.2.tar.gz >>>cd radiusclient-ng-0.5.2 >>>./configure >>>make >>>make install >>> >>>#vi /etc/ld.so.conf >>># /usr/local/lib >>>cat "/usr/local/lib" > /etc/ld.so.conf.d/radius- i386.conf >>> >>>ldconfig >>>cd .. >>> >>>else >>>printf "OK YOU did not Pressed Y that means you don't want radius >>>client lib. I don't care, I am just a script \n" >>> >>>fi >>> >>>echo "------ MEDIAPROXY -------------------" >>>printf "Do you want to Mediaproxy (Y/N)?" >>> >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>>cd /usr/local/src/ >>>wget >>><http://mediaproxy.ag-projects.com/old/mediaproxy-1.4.2.tar.gz>http://mediaproxy.ag-projects.com/old/mediaproxy-1.4.2.tar.gz >>>tar mediaproxy-1.4.2.tar.gz >>>mv mediaproxy /usr/local/mediaproxy >>> >>>#cp mediaproxy.ini.sample mediaproxy.ini >>> >>>#vi mediaproxy.ini >>># edit the options as per our envi. >>>cd /usr/local/mediaproxy/ >>>wget <ftp://$TEMPLATE/configure_ser>ftp://$TEMPLATE/configure_ser >>>_server/configfiles/mediaproxy.ini >>> >>>cp /usr/local/mediaproxy/boot/mediaproxy.other /etc/init.d/mediaproxy >>>/etc/init.d/mediaproxy start >>>cd /usr/local/src/ >>> >>>else >>>printf "OK YOU did not Pressed Y that means you dont want >>>Mediaproxy. I dont care, But remember SIP users wont be able to talk \n" >>>fi >>> >>>echo "------ ser -------------------" >>>printf "Do you want to INSTALL SER (Y/N)?" >>> >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>> >>>## We make changes in the Makefile for all the modules, build our >>>own tar and store it on our ftp server. >>>#wget >>><http://ftp.iptel.org/pub/ser/0.9.6/src/ser-0.9.6_src.tar.gz>http://ftp.iptel.org/pub/ser/0.9.6/src/ser-0.9.6_src.tar.gz >>> >>>cd /usr/local/src/ >>>wget >>><ftp://$TEMPLATE/configure_ser_server/ser-0.9.6_bingo.tar.gz>ftp://$TEMPLATE/configure_ser_server/ser-0.9.6_bingo.tar.gz >>>echo "Press ENTER to start" >>>read >>>tar zxvf ser-0.9.6_bingo.tar.gz >>>echo "Press ENTER to start" >>>read >>> >>>cd ser-0.9.6 >>>pwd >>> >>>#cd modules/acc >>>#vi Makefile >>>#remove comment from sql and radius lines >>> >>>#vi Makefile >>>#remove *_radius from exclude list >>> >>>make all >>>make install >>>cd /usr/local/etc/ser/ >>>wget >>><ftp://$TEMPLATE/configure_ser_server/configfiles/ser.cfg>ftp://$TEMPLATE/configure_ser_server/configfiles/ser.cfg >>> >>>else >>>printf "OK YOU did not Pressed Y that means you don't want a >>>softswitch you. Just playing with me HUHH, OK \n" >>>fi >>> >>># >>><http://www.openser.org/docs/openser-radius-1.0.x.html>http://www.openser.org/docs/openser-radius-1.0.x.html >>># ---------------------------------------------- >>>echo "------ APACHE -------------------" >>>printf "Do you want to INSTALL APACHE (Y/N)?" >>>read X >>>if [ "x$X" == "xY" ]; then >>>cd /usr/local/src/ >>>wget >>><http://www.axint.net/apache/httpd/httpd-2.2.3.tar.gz>http://www.axint.net/apache/httpd/httpd-2.2.3.tar.gz >>>tar zxvf httpd-2.2.3.tar.gz >>>cd httpd-2.2.3 >>>./configure --enable-shared=max --enable-module=rewrite >>>--enable-module=so --with-apxs2 >>>make >>>make install >>> >>>else >>>printf "OK YOU did not Pressed Y that means you dont want APACHE. >>>You might need this for serweb. \n" >>>fi >>> >>>echo "------ IMAP -------------------" >>>printf "Do you want to INSTALL IMAP, (Y/N)?" >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>> >>>cd /usr/local/src/ >>>cd /usr/local/src/ >>>#wget >>><http://www.mirrorservice.org/sites/tp.cac.washington.edu/imap/old/imap-2004c1.tar.Z>http://www.mirrorservice.org/sites/tp.cac.washington.edu/imap/old/imap-2004c1.tar.Z >>> >>>wget >>><ftp://192.168.2.201/configure_ser_server/imap-2004c1.tar.Z>ftp://192.168.2.201/configure_ser_server/imap-2004c1.tar.Z >>> >>>tar zxf imap-2004c1.tar.Z >>> >>>cd imap-2004c1 >>>make slx SSLTYPE=none >>>cd c-client/ >>>cp c-client.a /usr/lib >>>cp rfc822.h mail.h linkage.h /usr/include/ >>> >>>else >>>printf "OK YOU did not Pressed Y that means you dont want APACHE. >>>You might need this for serweb. \n" >>>fi >>> >>> >>>echo "------ PHP 4.xx -------------------" >>>printf "Do you want to INSTALL PHP 4.xx, If you dont install this >>>then DONT complain if your serweb doesnt work (Y/N)?" >>> >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>> >>>cd /usr/local/src/ >>>wget >>><http://museum.php.net/php4/php-4.3.10.tar.gz>http://museum.php.net/php4/php-4.3.10.tar.gz >>>tar zxvf php-4.3.10.tar.gz >>>cd php-4.3.10 >>>./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql >>>--with-imap >>>make >>>make install >>> >>>cp php.ini-dist /usr/local/lib/php.ini >>>cd /usr/local/apache2/ >>>wget >>><ftp://$TEMPLATE/configure_ser_server/configfiles/httpd.conf>ftp://$TEMPLATE/configure_ser_server/configfiles/httpd.conf >>> >>> >>>#vi /usr/local/apache2/conf/httpd.conf >>># AddType application/x-httpd-php .php .phtml >>># LoadModule php4_module libexec/libphp4.so >>># >>># modify the index.html line and add index.php to the list >>># >>># Listen 81 >>> >>>/usr/local/apache2/bin/apachectl start >>> >>>else >>>printf "OK YOU did not Pressed Y that means you refused to >>>install PHP. You will need this for serweb. \n" >>>fi >>> >>>echo "------ PHP 4.xx -------------------" >>>printf "Do you want to INSTALL PHP 4.xx, If you dont install this >>>then DONT complain if your serweb doesnt work (Y/N)?" >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>> >>>cd /usr/local/src/ >>> >>>wget >>><http://ftp.iptel.org/pub/serweb/serweb-0.9.6.tar.gz>http://ftp.iptel.org/pub/serweb/serweb-0.9.6.tar.gz >>> >>>tar zxvf serweb-0.9.6.tar.gz >>> >>>mv serweb-0.9.6 serweb >>># next few line have been taken care of httpd.conf in apache installation. >>> >>>#vi /usr/local/apache2/conf/httpd.conf >>> >>>#Alias /serweb "/usr/local/serweb/html/" >>> >>>#<Directory "/usr/local/serweb/html"> >>># AllowOverride None >>># Options None >>># Order allow,deny >>># Allow from all >>>#</Directory> >>> >>>cd /usr/local/serweb/config >>> >>>#vi config* >>> modify all config files are per your env. >>> >>>#edit: >>>#vi /usr/local/etc/ser/ser.cfg >>>#fifo_mode=666 >>> >>>#Send daily missed calls >>>#Crontab line: >>>#5 0 * * * /usr/local/bin/php >>>/usr/local/serweb/scripts/cron_job/send_daily_missed_calls.php >>> >>>#Server monitoring >>>#Crontab line: >>>#* * * * * /usr/local/bin/php >>>/usr/local/serweb/scripts/cron_job/read_ser_moni.php >>> >>>else >>>printf "OK YOU did not Pressed Y that means you refused to >>>install PHP. You will need this for serweb. \n" >>>fi >>> >>> >>>echo "------ DIALIP_ADMIN -------------------" >>>printf "Do you want to INSTALL DIALUP_ADMIN (Y/N)?" >>>read X >>> >>>if [ "x$X" == "xY" ]; then >>> >>>cd /usr/local/src/ >>>wget >>><http://nchc.dl.sourceforge.net/sourceforge/dialup-admin/dialup_admin-1.62.tar.gz>http://nchc.dl.sourceforge.net/sourceforge/dialup-admin/dialup_admin-1.62.tar.gz >>> >>> >>>tar zxvf dialup_admin- 1.62.tar.gz >>>mv dialup_admin /usr/local/radiusadmin >>> >>>#vi /usr/local/apache2/conf/httpd.conf >>> >>>#Alias /radius "/usr/local/radiusadmin/htdocs/" >>> >>>#<Directory "/usr/local/radiusadmin/htdocs"> >>># AllowOverride None >>># Options None >>># Order allow,deny >>># Allow from all >>>#</Directory> >>> >>>#cd /usr/local/radiusadmin/sql >>># import all sql queries to radius database >>>#cd /usr/local/radiusadmin/conf >>># modify config files >>> >>> >>>********************** >>> >>> >>>On Dec 10, 2007 9:15 PM, ram >>><<mailto:talk2ram@gmail.com>talk2ram@gmail.com > wrote: >>> >>>On Dec 10, 2007 11:02 PM, Jai Rangi >>><<mailto:jprangi@gmail.com>jprangi@gmail.com> wrote: >>>Preparing Kickstart file is a good idea. >>>How about running a post installation script in the kickstart >>>file. We have done this a lots on time in FC*. The process should >>>be something like this, >>>1. Build a default kickstart file that will install all the >>>required packages for all the ser components. >>>2. The kickstart file have an option to run a post installation script. >>>3. Now we need to have one zip file of all the components we want >>>to install related to ser. (ser, werbwer, sems, sipp, sppsak >>>etc). That file can be placed either on the CDs or can be >>>downloaded from somewhere. All the components can be packaged in >>>the one zip file of they can be downloaded separately. >>>4. The script can be interactive. >>> >>> >>> >>>yes that will be the idea, for the CD install >>> >>>after install of OS, we can run post install script to compile >>>rest all required for >>>SER ( or compile already for the same OS Distro and move them >>>directly to the respective Directory) >>> >>> >>> >>> >>>BTW I have a small postinstallation shell script like that, and I >>>can share that. >>> >>> >>>post to group, may be if require people may use. >>> >>>ram >>> >>> >>>-Jai >>> >>> >>>On Dec 10, 2007 3:42 AM, SIP <<mailto:sip@arcdiv.com> &gt;&gt;&gt;sip(a)arcdiv.com&gt; wrote: >>>Greger V. Teigre wrote: >>> > [removed sems, semsdev, and serdev from cc] >>> > >>> > >>> > SIP wrote: >>> >> Something I noted about the project. While I am all for a >>> virtual image >>> >> for testing purposes and getting things up and running while we're >>> >> creating this project, I think the ultimate goal should be something >>> >> like an ISO that's ready to go on a server. There are many of >>> us in the >>> >> systems world who have not bought into the whole virtualisation >>> >> marketing gimmick when it comes to system deployment, and for >>> the casual >>> >> home user who's less comfortable with using VMs for an actual >>> production >>> >> system (which is, to be honest, a lot of people), it might be >>> easier in >>> >> the long term to get everything the way we want it and then >>> make an ISO >>> >> that's ready to drop onto whatever machine with all the >>> components we need. >>> >> >>> > Ok. When you say "ISO that's ready to drop onto", do you have a >>> > particular procedure in mind? >>> > >>> > g-) >>>Something like taking a kickstart file and making an installable livecd >>>from it (something similar to the LiveCD berlios project). I don't KNOW >>>of one that works to create installable ISOs in CentOS, but I'm sure >>>there must be... somewhere... maybe....? >>>N. >>>_______________________________________________ >>>Serusers mailing list >>><mailto:Serusers@lists.iptel.org>Serusers@lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >>> >>>_______________________________________________ >>>Serusers mailing list >>><mailto:Serusers@lists.iptel.org>Serusers@lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >>> >>> >>> >>> >>> >>>_______________________________________________ >>>Serusers mailing list >>><mailto:Serusers@lists.iptel.org>Serusers@lists.iptel.org >>> >>>http://lists.iptel.org/mailman/listinfo/serusers >>> >> >>_______________________________________________ >>Serusers mailing list >><mailto:Serusers@lists.iptel.org>Serusers@lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers > > > > >_______________________________________________ >Serusers mailing list ><mailto:Serusers@lists.iptel.org>Serusers@lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers >